List of products by brand TDS

Spare O-Rings for M25x2 tanks valves. Sold in 20 units set

Spare HP O-Rings for pressure gauge internal axe piece. Sold in 20 units set

TDS Oceanus Scuba Diving Second Stage:  The TDS Oceanus second stage is a compensated scuba diving regulator second stage, features venturi control to prevent continuous flow and is entirely made of durable thermoplastic polymer.  

TDS Oceanus Scuba Diving Octopus: The TDS Oceanus octopus is a compensated second stage in alternate air source format, with 1m long yellow hose, yellow front cover for easy location and distinction, and made of lightweight materials.

TDS Ocean PS First Stage DIN for Scuba Diving Regulator: The TDS Oceanus PS first stage has 4 low pressure LP ports and one high pressure HP port, which allows a standard configuration with an additional low pressure outlet to connect a dry suit inflation hose. 

TDS Ocean PS First Stage INT for Scuba Diving Regulator: The TDS Oceanus PS first stage has 4 low pressure LP ports and one high pressure HP port, which allows a standard configuration with an additional low pressure outlet to connect a dry suit inflation hose. 

TDS Ocean PS Scuba Diving Regulator: The Ocean PS model is the single piston TDS series regulator. Simple configuration for high reliability and light weight. Ideal for diving schools, divers who are looking for simplicity, but also chosen by technical divers for stages.

Octopus holder adaptable to all kinds of mouthpieces. Allows carriying the octopus and locate it at all times.Prevent the sand or other contaminants incoming.

The Xtrem 2.1 is the improved model of the Omaha series of Rockboots for sock dry suits, the most advanced of TDS, used by armies and water rescue brigades. Redesigned sole is more flexible and made of an ultra-resistant material, which gives it a much better grip than previous models. It also has drainage holes for faster drying.

On / off valve that opens or closes the air flow into the hose line where it is installed. Ideal to place on the second stage regulator due to its small size. Approximate length: 4.5 cm

Oxygen cylinder connection 300 B (W 30x2). With coupling to DIN 200/300 allows oxygen transfer oxygen cylinders with 300 bar DIN connections transfer device 200 or 300Oxygen cylinder connection 300 B (W 30x2). With coupling to DIN 200/300 allows oxygen transfer oxygen cylinders with 300 bar DIN connections transfer device 200 or 300

Tube of oxygen compatible grease for scuba diving, for lubricating Viton O-rings or surfaces that are to be exposed to contact with this gas. Necessary in all scuba diving regulators that are in oxygen service, and essential in the maintenance of any model of Rebreather.

TDS Oxygen metalic decanting hose with digital pressure gauge and valve: TDS Metalic decanting device for oxygen, with relieving pressure valve, 100 mm hose, digital pressure gauge and DIN 200/300 filling connection at both sides.

Metalic decanting device for oxygen. Purge tap. With pressure gauge to control the amount of transferred gas. DIN 200/300 connections at both ends. Hose length 2 m approx.

Pressure gauge up to 400 bar, with steel case and rubber sheath in green for nitrox-oxygen.

TDS Painted 0.5 kg diving weight ballast. Wide slots to easily pass the strap belt. Weight 0.5 kg.

TDS Palma Amara Diving neoprene Gloves 2 mm: 2 mm thickness neoprene glove with water resistant amara leather palm to achieve greater sense of touch. Velcro closing on the wrist.

Plastic hook to place at the end of a 5 mm rubber band. It is very useful in accessories like wetnotes, pencils, computers ... etc to keep seuros, but also operational without his ring drop.