Pressure gauge in high quality metal housing and highly resistant mineral glass.Metalic and mineral glass finish.Scale up to 400 bar
The TDS PY63 press gauge is specially designed for stage tanks; its main characteristic is that it has an expanded diameter of 63 mm (unlike standard gauges that have average 52 mm). The scale is enhanced by this larger diameter and also has the novelty that the mark of 100 bars is in the vertical, which helps in low visibility conditions and the backlit display, the needle is perfectly distinguishable.
High quality pressure gauge with metal body and side handle, specially designed for diving in sidemount. Finished in metal and mineral glass. Scale up to 400 bar.
Pressure gauge with metal body and up to 400 bar scale, ultra-resistant and durable due to to the protective rubber that covers it. Includes 80 cm length high-pressure hose.
Pressure gauge up to 400 bar, with steel case and rubber sheath in green for nitrox-oxygen.
Wrist compass with a new bungee support system , very safe, easy and fast to install, bungee type support fits snugly to the wrist regardless of the suit being used.
New model tds diving compass pro liquid filled wrist in Bungee version (also available in rubber strap version). Redesigned quick response even in readings with up to 30 degrees.
Surface gauge for checking pressure out of the water bottles. DIN system. Purge by knob. Dial easy to read. Scale up to 400 bar. Is clean for use with oxygen, but if used with air the O2 service is lost.
Metalic decanting device specially designed for oxygen. Purge tap. DIN 200/300 connections at both ends. Hose length 2,10 m approx.
Metalic decanting device for oxygen. Purge tap. With pressure gauge to control the amount of transferred gas. DIN 200/300 connections at both ends. Hose length 2 m approx.
Metalic decanting device for oxygen, with relieving pressure valve, 2m hose, pressure gauge and DIN 200/300 filling connection at both sides.
tds metalic decanting hose with digital pressure gauge and valve: tds Metalic decanting device for oxygen, with relieving pressure valve, 100 mm hose, digital pressure gauge and DIN 200/300 filling connection at both sides.
