NITROX TANK DECAL

TDS

TDS Nitrox Scuba Diving Tank Decal: Tds nitrox identification sticker to put on bottles Nitrox tanks and make a perfect identification and distinction from other bottles. Dimensions 60 cm x 15 cm

JET FIN STRAP BLACK (2 Unt)

TDS

Replacement strip part for rubber fins models like Jet Fin model in black color.2 Units included.

QUICK-LINK S.S.

DTD
€3.50 -10% €3.15
Quick-Link stainless-steel, dimensions 36 x 17 mm, thickness 3,5 mm, opening max 5 mm.
  • -10%

PLASTIC ADAPTER FOR TWIN (Unit)

TDS
Plastic piece to join two cylinders and asembly a twin with straps (straps not included). Sold unit.
Outlet
VIEW OUTLET

STAINLESS STEEL M8 WASHER

TDS
tds stainless steel m8 washer: Flat tds washer made of stainless steel for M8 fasteners used in backplates, rings and single tank adapters.

ADITIONAL POCKET

DTD
€30.00 -20% €24.00
Additional pocket for backplate ballast system or belt. Dimensions 18x15x4 cm
  • -20%

M8 NUT S.S.

TDS
Stailess steel M8 nut. To set at M8 screws.

ARMADILLO BACK PAD

DTD
€41.00 -10% €36.90
Additional rear part of backplate for attaching the sidemount bottles.Material: Cordura 1100, webbing, stainless-steel AISI 316. Weight: 0,28 kg
  • -10%

M8 SCREW S.S. 25 MM

TDS
Stainless steel M8 screw and 25mm long. To attach the single tank adapter to the back plate.

M8 SCREW S.S. 30 MM

TDS
Stainless steel M8 screw and 30mm long. To attach the single tank adapter to the back plate, and for many other uses.

ALUMINIUM WHISTLE

DTD
€2.50 -20% €2.00

Red aluminium whistle for acoustic signal at surface. With keychain ring.

  • -20%

ELASTIC CORD - BUNGEE 6 MM (1 M)

TDS

tds elastic cord bungee 6 mm by meters:Elastic cord - bungee type 6 mm thick for many uses both in technical diving, as recreational: 2nd stage hang neck, fastening computers, tanks, sidemount ... etc. Color Black. Sold by meters

TANK STRAP W/STAINLESS STEEL BUCKLE

TDS

Tank strap that includes a heavy stainless steel buckle. It can be used with single tank adapters or in a conventional BCD.

INFLATOR KNEE JOINT

TDS

tds inflator knee joint joint: tds Replacement inflator knee joint (elbow) to connect the inflation trachea hose with the wing bladder.Made of high strength plastic, it has reinforcing ribs to better resist knocks and traction.

FLAT OVERPRESSURE DUMP VALVE

TDS

tds flat overpressure dump valve: tds Pressure relief - dump valve for wings and BCDs. The main feature is his very low profile, making the valve almost not protrude from the profile of the wing or jacket, favoring hydrodynamics and protecting it from blows.

GREEN KNOB

TDS

Valve knob made of green rubber, with a length greater than the usual knobs for easy opening and closing. They are compatible with most of the axes of the valves. Very used to distinguish decompression and rebreathers oxygen tanks.

2nd STAGE 90° REVOLVING CONNECTOR

TDS

Fixed elbow to place between the second stage and the hose, which allows routing to 90 degrees. Made of chrome plated brass. Thread 9/16 "Male to 9/16" female.

S80/S63 ALUMINIUM TANK BOTTOM

TDS

Tank bottom for aluminum tanks in S80 and S63 format. Protect the bottom of the bottles from bumps and scratches. Color: Black

DECO BUOY 30 LB

APD
€80.00

The AP Diving surface marker buoys can be inflated from a secondary air source, at any time during the dive to signal the end of it and mark the starting point .Also can be used as decompression globe.

MALE M26 TO DIN 200 G5/8 FEMALE CONVERTER

APD
€40.00 -20% €32.00
For gas-filling when travelling in Europe and/or adapting an M26x2 cylinder valve to accept a 5/8" BSP first stage, compressor connector or O2 whip
  • -20%

MALE DIN 200 G5/8 TO FEMALE M26 CONVERTER

APD
€35.00
For gas-filling when travelling in Europe and/or adapting a 5/8" BSP cylinder valve to accept a M26x2 first stage or compressor connector

SPOOL REEL BLACK 45 M

TDS

Reel spool type made of high strength plastic, redesigned side holes thats reduces weight and facilitates the carabiner hooking to retain the rope. Includes 45 m high visibility orange wire. Stainless Steel double bolt snap trigger included.

GUIDE LINE REEL 120 M

TDS

Style reel with side handle that allows tending line quickly, even if it is sailing with scooter. Besides the change of one hand facilitates the other. It Includes 120 meters high visibility orange line and stainless steel double bolt snap.

REEL 120 M

DTD
€169.00 -10% €152.10
Reel with a classic shape, manufactured from durable delrin. Delrin is used more and more often for manufacturing of diving equipment as its tensile properties, mechanical ruggedness and minimal absorbability. Weight: 0,88 Kg diameter: 125 mm width: 58 mm
  • -10%