Cookie preferences
Español
English
Français
- -20%
- Out-of-Stock
PY63 DIR PRESSURE GAUGE 350 B METAL
The TDS PY63 press gauge is specially designed for stage tanks; its main characteristic is that it has an expanded diameter of 63 mm (unlike standard gauges that have average 52 mm). The scale is enhanced by this larger diameter and also has the novelty that the mark of 100 bars is in the vertical, which helps in low visibility conditions and the backlit display, the needle is perfectly distinguishable.
You might also like
- -20%
PRESSURE GAUGE INTERNAL SWIVEL
This piece composed the rotary mechanism of the gauge. When are leaks in this area, is for the deterioration of this parts or for the o-rings and for the high pressure.
- -20%
HP GAUGE HOSE 110 CM
HP high pressure hose for pressure gauge 110 cm length. Connect the first stage regulator with a pressure gauge.
- -20%
HP GAUGE HOSE 15 Cm
High pressure hose for pressure gauge 15 cm length. Special to set the pressure gauge on the regulator of stage or bailout tank or in sidemount configurations.
- -20%
PRESSURE GAUGE HP HOSE 18 CM
High pressure hose for pressure gauge 18 cm length. Special to set the pressure gauge on side stage or bailout tank regulator.
- -20%
- Out-of-Stock
HP GAUGE HOSE 65 CM
HP high pressure hose for pressure gauge 65 cm length. Connect the first stage regulator with a pressure gauge.
- -20%
O-RINGS FOR PRESSURE GAUGE AXE (20 Units)
Spare HP O-Rings for pressure gauge internal axe piece. Sold in 20 units set
