List of products by brand TDS

Diving valve with M25x2 thread standard and EN144-1 rule. Removable core to engage with DIN regulators system. Long plastic knob for easy opening and closing.

Adapter part which converts a low-pressure outlet of the first stage, in three low pressure outlets routed as T.

Samsung 18650 Lithium Battery for TDS Maru / Dzenot diving led lights: Samsung Ion-Lithium battery 18650 type, compatible with TDS Maru and DZenot lights. It is also valid for other light models that uses this type of battery. Capacity: 2900 mAh, Voltage: 3.7 V

Twins valve for 10 or 12 liters in long form cylinders (171 mm diameter). With metric M25x2 EN144 thread . Manifold connection with isolation valve.

TDS 21700 lithium battery for Kave diving led light: Ion-Lithium battery 21700type, compatible with TDS Kave lights. It is also valid for other light models that uses this type of battery. Capacity: 4800 mAh, Voltage: 3.7 V

Automatic charger for Ion-Li batteries of the type 21700 and 18650. Let to charge 1 battery. LED indicator light load and full load. USB power. Valid for TDS Kave Diving light

Tool to adjust the height of the cam of the second stage, and leave it in the optimum position without leaks and with the least effort of inspiration. Essential in any workshop regulators

Second stage regulator swivel that allows hose at an angle of 120 degrees in a fixed possition.

Second stage regulator swivel that allows hose rotation up to 120 degrees orientable.

Second stage swivel regulator. It is connected between the hose and the second stage, and gives freedom to turn the hose. Prevents pulling the mout

Fixed elbow to place between the second stage and the hose, which allows routing to 90 degrees. Made of chrome plated brass. Thread 9/16 "Male to 9/16" female.

Tool to adjust the height of the cam of the second stage, and leave it in the optimum position without leaks and with the least effort of inspiration. Essential in any workshop regulators

Twins valve for 18 liters long cylinders (216 mm diameter). With metric thread M 25x2 EN144. Manifold connection without isolating valve

Valve with 3/4 Gas (3/4 NPSM) thread for old cylinders , exit DIN / INT convertible by core and rupture disc according to the DOT standard. Black plastic knob on the left and modular output for connection to manifold.

Single valve to old tanks of 3/4 Gas (3/4 NPSM), DIN/INT connection. Hand Wheel Grip in black rubber on lef.

TDS Coupling for connecting 300 bar Oxygen/Helium Nevoc conections (sold separately, see related products below) to female DIN 232. Allows to connect equalizer hoses DIN 200/232 to 300 Bar Helioum or Oxygen cylinders.

TDS Coupling for connecting 300 bar Oxygen/Helium Nevoc conections (sold separately, see related products below) to female DIN 300. Allows to connect equalizer hoses DIN 300 to 300 Bar Helioum or Oxygen cylinders.

Tds abadon 5 mm wetsuit, made of super elastic neoprene with sealed seams and much studied reinforcements in high wear areas. Large pocket for accessories. This suit model is used by various professional groups and rescue teams, as firefighters and technical divers.

TDS abadon 7 mm wetsuit, made of super elastic neoprene with sealed seams and much studied reinforcements in high wear areas. Large pocket for accessories. This suit model is used by various professional groups and rescue teams, as firefighters and technical divers.

The Adventure range is the evolution in TDS adventure suits, specially designed for activities such as canyoning. The entire Adventure range has reinforced rubber reinforcements in the key areas for adventure sports: butt area, elbows and knees are perfectly protected against the usual friction shocks in this type of activities.

Surface gauge for checking pressure out of the water bottles. DIN system. Purge by knob. Dial easy to read. Scale up to 400 bar. Is clean for use with oxygen, but if used with air the O2 service is lost.

TDS Oxygen & Air Metalic decanting hose with digital pressure gauge and valve for technical scuba diving: TDS Metalic decanting device for oxygen, with relieving pressure valve, 100 mm hose, digital pressure gauge and DIN 200/300 filling connection at both sides.