ALUMINIUM BACKPLATE
tds aluminium back plate: Anodized Aluminum Back Plate from TDS. Holes that let you adjust in two different heights. Perforations to pass the single tank straps. Multiple holes for different accessories.
TDS
tds aluminium back plate: Anodized Aluminum Back Plate from TDS. Holes that let you adjust in two different heights. Perforations to pass the single tank straps. Multiple holes for different accessories.
Stainless Steel Back Plate from TDS.Compatible with all DTD accessories. Holes that let adjust in two different heights. Perforations to pass the single tank straps.
TDS Anodized Aluminum Reduced Back Plate. Ideal for travel thanks to its light weight: only 500 g. Perimeter edges and perforations completely beveled to avoid damaging equipment and harness straps.
The TDS spools are manufactured with aeronautical anodized black aluminum alloy. Specifically designed for technical diving, incorporate special features such as the serrated edge for an optimal grip even with gloves and oversized holes for easy operation.
The TDS spools are manufactured with aeronautical anodized black aluminum alloy. Specifically designed for technical diving, incorporate special features such as the serrated edge for an optimal grip even with gloves and oversized holes for easy operation.
Complete TDS backmount technical diving system Arrow 32 Travel single tank. Complete and ready to dive, simply needs to be adjusted to the diver's measurements. The Arrow system in travel version includes an ultra light and comfortable soft backpack ideal for travel or easy transport. The padded back pad allows the weight to be evenly distributed for maximum comfort.
Ballast system for back plate, consisting of two pockets that are attached to a webbing and end in a riveted ring, which is attached to the holes of the back plate. The left pocket includes a D-ring for attaching a pressure gauge or monitoring device.
Battery charger for Lithium-Ion batteries, valid for TDS Hydor 4000 Scuba Diving led lights range.
Battery for TDS Altair 2600 & Subacqua S2600 Scuba Diving Led Lights: Ion-Li battery type 3,7 V valid for Altair 2600 lumen and Subacqua S2600 diving LED lights.
Battery for TDS Altair 4200 & Subacqua S4200 Scuba Diving Led Lights: Ion-Li battery 26650 type 3,7 V valid for Altair 4200 lumen and Subacqua S4200 diving LED lights.
TDS 18650 lithium battery for Altair S1000 diving light: Ion-Lithium battery 18650 type, compatible with TDS Altair S1000 light. It is also valid for other light models that uses this type of battery. Voltage: 3.7 V
TDS Lithium battery for Helios 6000 underwater video light: Ion-Lithium battery compatible with TDS Helios 6000 underwater video light. Voltage: 14,4 V Capacity: 3400 mAH
Battery for TDS Hydor Tech 4000 Scuba Diving Led Lights: Ion-Li battery type valid for TDS Hydor Tech 4000 lumen scuba diving LED lights.
Battery for TDS Hydor Umbilical/Sidemount 4000 Scuba Diving Led Lights: Ion-Li battery type valid for TDS Hydor Umbilical/Sidemount 4000 lumen scuba diving LED lights.
Baudrier weight system harness, consisting of three weighted pieces for a total weight of 7 kg.This kind of weight system, commonly used in professional and commercial diving, is ideal for all divers who need a large amount of weight, especially if diving with dry suit, because it allows for weight distribution along the shoulders and it is much more convenient than carrying a lot of weight at the waist.It includes reinforced nylon straps with plastic buckles, which form a fully adjustable harness.Three weights in a triangular back formation and two on the side.
Multipurpose hanger specially designed to hang heavy diving gear. Robust design to easily support the BCD and regulator weight. Ideal for drying the gear in the diving center or at home.
TDS Scuba Diving BC Hose 74 cm: Low pressure hose to inflate your jacket. Standard valve connection to BPI and LP 3/8 thread for connection to the first stage.
Low pressure hose to inflate your jacket. Standard valve connection to BPI and LP 3/8 thread for connection to the first stage.
Nylon belt buckle in stainless steel and pressure fastening system. Lenght: 148 cm.
TDS Iron 20 L Technical Scuba Diving Wing for Twins: Donut wing type 20 l capacity with 1000 deniers, double polyurethane bladder. Suitable for diving with double tanks.
TDS Scuba Diving Black Tek Shorts with Pockets: TDS bermuda shorts with pockets are perfect for use with wet suits or dry suits that do not have pockets, for an additional storage system, so necessary in technical diving, and also very useful in recreational dives.
DEMA SHOW is one of the few international fairs dedicated to the global diving...
The International Diving Congress, Diving Talks, will be held from October 6th to...
If you want to explore the mysteries of the underwater world and get your PADI...