TDS Stainless Steel Micra Knife: The TDS Micra is a knife that stands out for its small size and its lightness, which allows it to be placed anywhere in the BCD being always available for use, but with no interferences

Aqualung Lotus Charcoal Scuba Diving BC: The Lotus is a back inflation style BC designed specifically for women and incorporates Aqua Lung’s integrated Wrapture™ Harness System. With the Lotus, the Wrapture™ Harness System hugs the contours of the female body with specially curved shoulder straps and side lobes that provide better fit. Integrated weights are held securely in place with the SureLock II™ mechanical weight system.

Coltri 235 - 315 ETS Mark III Silent Scuba Diving High Prressure Compressor: MCH18 Coltri compressor model and MCH 18 Compact three-phase electrical Evo. Bottles for recharging at high pressure. High flow filling. Body fairing with acoustic damping. Electric motor. Automatic purges condensation. Filtering system for activated carbon.

Replacement filter cartridge for the suction of air from the MCH 11/13/16/18  compressors.

Activated carbon canister parts to fill the cartridge air purifier filter used in MCH13-16-36 compressors.

Replacement cartridge for the air filtering system of MCH6 / Icon High Pressure Scuba diving compressors (electric and gasoline). Filters and purifies the air by means of activated carbon. It also retains humidity by means of a molecular sieve. Very important its replacement and maintenance as the life of these filters is limited. Consult the manufacturer's recommendations.

Load valve without purging and INT connection, valid for compressors Coltri MCH 6 portable.

Filling connection DIN 232 bar for MCH 6., valid for compressors Coltri MCH 6 portable.

Aluminum filter cartridge to the filter system model Coltri compressors MCH36.

Panel loading with 4 exits for connection to any compressor Coltri range. It has manometer to control the load pressure. Combined with a bank of air, it can be an ideal place for a bottle loading station configuration.

Coltri 450-550-650-750 ET Open threephasic Scuba Diving High Pressure Compressor: Open meets professional needs that require large charging capacities in hot, poorly ventilated or tropical countries. It is equipped with 4 front filling connections for high pressure hoses, an intuitive control panel and an electric motor. The pumping unit, chosen from the 4 most powerful, is exposed in the rear part of the structure to ensure a better cooling cycle. For longer filter life, the Tornado high pressure dryer is recommended

Coltri 450-550-650-750 ETS Silent Scuba Diving High Pressure Compressor Threephasic: The SILENT model represents excellence in soundproofing. It has been designed to meet the needs of very intensive uses and when large filling capacities are required. Equipped with 4 front filling connections for high pressure hoses (from 232 to 420 bar), a control panel and an electrical display. They are equipped with a three-phase electric motor and powerful pumping units (450 550 650 750 depending on the specific model). 

Oil filter cartridge for MCH 22/30/36 (up to 2018) and 15/16/18 TPS (up to 2021)

Elolo Coltri compressor model. For continuous low pressure supply. Surface supply. Open body. Electric motor. Filtering system for activated carbon.

Eolo Coltri compressor model. For continuous low pressure supply. Surface supply. Open body. Gasoline engine. Filtering system for activated carbon.

Teflon closure spare part for EN 144-1 diving valve. Total legth: 15 mm

Chrome Brass protective cap with integrated purge valves DIN 300. Protects the threads and prevents leakage of gas bottle an unintentional openings, such as when transported in the trunk of the car.

Rubber protective cap for INT valves. Absorbs impacts and prevents dirt inside.

Knob for the valve made in black rubber, with a length greater than the usual knobs for easy opening and closing.