TDS Abadon 3 mm wetsuit, made of super elastic neoprene with sealed seams and much studied reinforcements in high wear areas. Large pocket for accessories. This suit model is used by various professional groups and rescue teams, as firefighters and technical divers.

TDS Coupling for connecting G1/4 threads. For decanting hoses connections. Allows the connection between decanting hoses. Also valid for HP Booster connections.

Replacement bladder for the TDS Iron 20 technical diving wing. Circular design in heat-sealed cordura. Base for welded valves and trachea.

The  TDS spools are manufactured with aeronautical anodized black aluminum alloy. Specifically designed for technical diving, incorporate special features such as the serrated edge for an optimal grip even with gloves and oversized holes for easy operation.

The TDS Tac Black regulator also in complete set with all the necessary components to configure as a twin regulator system.

Flexible support for twins, which allows to assemble different capacities cylinders  with a single system. Easy to assemble, versatile and lighter than fixed hoops, is also possible to fold it for transport and travel with.  The set is delivered disassembled. The images show examples of assembly

Suex brought the GPS signal underwater in wireless mode - SEIKA transmits the position to all ERON D-1s in the water. SEIKA uses an embedded GNSS (Global Navigation Satellite System) receiver within an SMB (Surface Marker Buoy) to capture precise diver position and communicate wireless that position to the Suex Eron D-1 dashboard.

11.1 liters (80 cubic feet) tank made of aluminum alloy 6061-T6. CE approval. Flat bottom. Dimensions: Diameter - 184.2 mm; Height - 658 mm. Weight: 14.2 kg .200 Bar

11.1 liters (80 cubic feet) tank made of aluminum alloy 6061-T6. CE approval. Flat bottom. Dimensions: Diameter - 184.2 mm; Height - 658 mm. Weight: 14.2 kg .200 Bar

11.1 liters (80 cubic feet) tank made of aluminum alloy 6061-T6. CE approval. Flat bottom. Dimensions: Diameter - 184.2 mm; Height - 658 mm. Weight: 14.2 kg .200 Bar

Decorative patch for bags, suits, caps...etc with TDS logo and emblem of a frog skeleton with trident, in Grey on black background. Velcro fastening

Decorative patch for bags, suits, caps...etc with TDS logo in Grey on black background. Velcro fastening

Cressi Kevlar Neoprene Scuba Diving Spearfishing Gloves 3 mm: Professional preformed gloves made in neoprene with high resistance to compression, of 3mm thickness.

TDS abadon 7 mm wetsuit, made of super elastic neoprene with sealed seams and much studied reinforcements in high wear areas. Large pocket for accessories. This suit model is used by various professional groups and rescue teams, as firefighters and technical divers.

Oxygen sensor for NTS Nitrox & Trimix Blender Panels

TDS Coupling for connecting G1/4 threads. For decanting hoses connections. Allows the connection between decanting hoses. Also valid for HP Booster connections.

Steel stainless ring for fitting aluminium S080 twin cylinders long with 11.1 liter. 186 mm diameter. Strip width 57 mm

Mares Helmet Light Brackets for scuba diving: Light Brackets have been designed by Mares to attach flashlights to the Rigid Cap helmet of the Mares XR line. The size of the brackets allows the installation of any spare flashlight.

Blanking plug for SI TECH Pee Valve, Inflation and Exhaust Valves. Available with large/small guide ridge. Anti-friction washer

The ultimate in wetsuit luxury, the Apeks ThermiQ Adv 8/7 is a warm, flexible wetsuit that is feature-rich and developed for the demands of advanced diving. Suitable for anyone wanting top-end comfort and performance, the ThermiQ 8/7 is also kinder to our environment. The suit is made from limestone-based neoprene, instead of the more traditional chemical-based petroleum neoprene.

At the top of the Nitrox line, the Coltri LP600 ROTARY system consists of an industrial screw compressor that delivers air at a pressure of 8 bar to a membrane that separates nitrogen and oxygen at atmospheric pressure until Nitrox 40% O2 is obtained and can be compressed at a pressure of 232 bar in combination with a high pressure compressor. The percentage of oxygen obtained at the outlet can be regulated from 22.4% to 40% using a valve directly accessible on top of the compressor. Exclusive to the the Heavy Duty line compressors.

The Coltri LP300 Nitrox ROTARY model consists of an industrial screw compressor that delivers air at a pressure of 12 bar to a membrane that separates nitrogen and oxygen up to a maximum percentage of 40% O2. The enriched air can be compressed at a pressure of 232 bar in combination with a high pressure compressor. The percentage of oxygen obtained at the outlet can be regulated from 22.4% to 40% using a valve directly accessible on top of the compressor. The oxygen analyser allows checking of the correct percentage adjusted by means of the appropriate valve.

Apeks RK3 Diving Fin: Designed in collaboration with the US military and renowned for outstanding performance and reliability, the Apeks RK3 is a rugged thermoplastic rubber fin featuring an over-sized foot pocket to accommodate drysuit boots and a spring strap for easy donning and doffing. The RK3 is available in three sizes: Medium, Large and Super.