CGA 580 Helium cylinder connection to G1/4 male. With coupling to DIN 200/300 allows helium transfer from cylinders with decanting device 200 or 300 (sold separately, see related products below)
CGA 540 Oxygen cylinder connection to G1/4 male. With coupling to DIN 200/300 allows oxygen transfer from oxygen cylinders decanting device 200 or 300 (sold separately, see related products below)
Suex Goldfinger XK Jet Black DPV Scooter: Underwater scooter for technical/professional use with aluminium body. The Goldfinder-XK model is the perfect DPV for technical features Goldfinder-XK and professional use: it allows long-range and cave exploration thanks to the Li-ION battery it is equipped.
Suex Goldfinger XJ Jet Black DPV Scooter: Underwater scooter for technical/professional use with aluminium body. Underwater scooter for technical/professional use with aluminium body. The Goldfinder-XJ model is equipped with a Li-ION battery and therefore a high capacity is granted. The battery can be monitored through the Calypso app and the Eron D-1 dashboard and the diver can have full control of the dive
Next generation smart air integration transmitter. The Swift allows divers to carry multiple transmitters reliably. The collision avoidance protocol allows for multiple transmitters to be used at the same time with a lower likelihood of dropped communications. The Swift is designed and built in Canada for demanding divers of all proficiency levels.
Our most compact dive computer redefines diving convenience and versatility for sport divers. Incorporating a compact design with advanced features, the TERN TX includes both optional wireless air integration with up to 4 tanks and a digital compass. Its enhanced visibility, user-friendly interface, and compatibility with multiple diving modes, make it an essential tool for divers seeking reliability and ease of use.
Silicone Wrist Seals are constructed from hypoallergenicic silicone that have 40 % better stretch and offer enhanced comfort compared to latex seals. Divers with latex allergies can dive carefree, knowing that the seals are non-allergenic.
TDS Confort Plus Techncial Scuba Diving Harnais: Technical harness for mounting on back plate (not included) with adjustable and removable shoulder straps and all additional components. The set is sold disassembled so that the diver can mount it on his plate adapting it to his measurements and configuration preferences.
Stainless steel bolt snap type with oval swivel eye, 120 mm 1 1/4"
TDS Tek Advanced diving surface marker buoy SMB 150 cm legth in red color. The inflation is realized by plastic valve with a bc hose, wing hose or dry suit hose. Also allows the buccal inflation.
Thanks to its closed system, the air remains in the interior preserving the shape of the buoy, keeping it erect and comletely inflated on surface. It´s also possible to use as a bouyancy emergency element on the surface.
TDS slate book with 40 waterproof pages and cordura cover with small pockets. Includes graphite pen attached with bungee to one edge of the cover. Allows writing in and out of the water.
Complete harness for mounting a side tank for stage, bailout or side mount. It is valid for aluminum cylinders used in technical diving of the S40 type. The set comes pre-assembled and requires minimal installation by the user, thus customizing the position of the tank.
Complete harness for mounting a side tank for stage, bailout or side mount. It is valid for aluminum cylinders used in technical diving of the S80 type. The set comes pre-assembled and requires minimal installation by the user, thus customizing the position of the tank.
Plate for mounting a single bottle on back plate, in polished aluminum. Includes set of two bottle straps with stainless steel buckle. Also includes a complete set of screws with spherical head, square body to avoid turning when tightening, washers and wing nuts. Approximate weight of the set 1 kg
Heavy duty cordura accessory holder pocket for harness or jacket, perfect for carrying small accessories and even a spare mask . Ideal to place on harness webbing, jacket and even on belts with webbing up to 50 mm.
Complete TDS rear mount technical diving system for Arrow 30 Tek single tank with aluminum backplate. Complete and ready to dive, it simply needs to be adjusted to the diver's measurements. The Arrow system in Tek version includes a very light aluminum backplate easy to carry. The padded backplate cover pad allows the weight to be evenly distributed for maximum comfort.
The TDS Tolok pocket, is a specially pocket designed for technical diving, being valid for both backmount and sidemount systems thanks to the versatility of its design. A pocket designed down to the smallest detail to offer maximum performance to the technical diver.
Ballast system for back plate, consisting of two pockets that are attached to a webbing and end in a riveted ring, which is attached to the holes of the back plate. The left pocket includes a D-ring for attaching a pressure gauge or monitoring device.
High resistance cordura weight pocket for harness, with capacity for 2.3 kg ballast pads approximately. Fast closing and release clip in plastic on the outside and flap with Velcro. Ideal to place on harness webbing, tank webbing and even on belts. Stainless steel eyelet at the bottom for water drainage and rear strap to adjust to bottle buckle or harness. Sold by the unit.
TDS DIR Harness Scuba Diving Harnais: Technical harness for mounting on back plate (not included), with all necessary components included for a basic DIR configuration. The set is sold disassembled for the diver to assemble on his plate with his personal settings and preferences.
Double bolt snap trigger carabiner type in stainless steel, available in various sizes. It's perfect for working with buoys, spools and lines already laid. Available sizes: 115 mm,
Semi-dry suit with great elasticity and full of details for technical divers who want to break free from the discomfort of dry suit, but retaining a high quality thermal protection
Cookie preferences
