Transfer device to equalize pressures of bottles and / or transfer of gas to make mixtures. INT abutment connections at both ends, pressure gauge and purge control knob fitting for comfort. Approximate length of the hose 1 m.

Wrist compass with a new bungee support system , very safe, easy and fast to install, bungee type support fits snugly to the wrist regardless of the suit being used.

Surface gauge for checking pressure out of the water bottles. DIN system. Purge by knob. Dial easy to read. Scale up to 400 bar. Is clean for use with oxygen, but if used with air the O2 service is lost.

Eolo Coltri compressor model. For continuous low pressure supply. Surface supply. Open body. Gasoline engine. Filtering system for activated carbon.

Coltri 235 - 315 ETS Mark III Silent Scuba Diving High Prressure Compressor: MCH18 Coltri compressor model and MCH 18 Compact three-phase electrical Evo. Bottles for recharging at high pressure. High flow filling. Body fairing with acoustic damping. Electric motor. Automatic purges condensation. Filtering system for activated carbon.

Steel stainless ring for fitting helmets twin cylinders long with 12 or 15 liter. 203 mm diameter. Strip width 57 mm

TDS Spool Reel for Scuba Diving with double snap 15 m line: Spool reel with 15 m of high visibility yellow line and double carabiner trigger in bronze. Perfect for deploying the deco buoy or use as guideline over short distances.

TDS Scuba Diving BC Hose 74 cm: Low pressure hose to inflate your jacket. Standard valve connection to BPI and LP 3/8 thread for connection to the first stage.

Tool to adjust the height of the cam of the second stage, and leave it in the optimum position without leaks and with the least effort of inspiration. Essential in any workshop regulators

Tool to adjust the height of the cam of the second stage, and leave it in the optimum position without leaks and with the least effort of inspiration. Essential in any workshop regulators

M 25x2, EN144-1 standar valve two autlets in "T" foarm. Thanks to T disposión, two mounting of twoseparate stages is much easier, and allows better access to manipulate the knobs during the dive

M 25x2 cylinder therad and EN144-1. Standard Yoke Outlet with a Spin-Out Threaded DIN Adapter.

M 25x2, EN144-1 standar valve two autlets in "V" format. Thanks to V disposión, two mounting of two separate stages is much easier, and allows better access to manipulate the knobs during the dive.

Diving valve with M25x2 thread standard and EN144-1 rule. Removable core to engage with DIN regulators system. Long plastic knob for easy opening and closing.

coltri mch13/16 air fliter cartridge: Propylene filter cartridge to the filter system of compressors Coltri MCH13 / 16 model

Coltri 450-550-650-750 ETS Silent Scuba Diving High Pressure Compressor Threephasic: The SILENT model represents excellence in soundproofing. It has been designed to meet the needs of very intensive uses and when large filling capacities are required. Equipped with 4 front filling connections for high pressure hoses (from 232 to 420 bar), a control panel and an electrical display. They are equipped with a three-phase electric motor and powerful pumping units (450 550 650 750 depending on the specific model). 

Molecular absorbent canister (alumina), to fill the cartridge air purifier filter used in MCH13-16-36 compressor.

Replacement filter cartridge for the suction of air from the MCH 11/13/16/18  compressors.

Activated carbon canister parts to fill the cartridge air purifier filter used in MCH13-16-36 compressors.