Prices drop

450-550-650-750 ET SILENT COMPRESSOR...

COLTRI

Coltri 450-550-650-750 ETS Silent Scuba Diving High Pressure Compressor Threephasic: The SILENT model represents excellence in soundproofing. It has been designed to meet the needs of very intensive uses and when large filling capacities are required. Equipped with 4 front filling connections for high pressure hoses (from 232 to 420 bar), a control panel and an electrical display. They are equipped with a three-phase electric motor and powerful pumping units (450 550 650 750 depending on the specific model). 

235 - 315 ET MARK III SILENT COMPRESSOR...

COLTRI

Coltri 235 - 315 ETS Mark III Silent Scuba Diving High Prressure Compressor: MCH18 Coltri compressor model and MCH 18 Compact three-phase electrical Evo. Bottles for recharging at high pressure. High flow filling. Body fairing with acoustic damping. Electric motor. Automatic purges condensation. Filtering system for activated carbon.

EOLO LOW PRESSURE COMPRESSOR (Electric)

COLTRI

Elolo Coltri compressor model. For continuous low pressure supply. Surface supply. Open body. Electric motor. Filtering system for activated carbon.

BTS VALVE FOR TWIN

BTS
€56.00 -10% €50.40
Outlet
VIEW OUTLET
Outlet
VIEW OUTLET
  • -10%

GLOVE LINER GOLVE 1.5 MM

FOURTH ELEMENT
€44.00 -10% €39.60
The G1 Glove Liners can be used under drygloves or wet mitts. Using hydrofoam provides the confidence that in the case of a dryglove failure, the glove liners will retain some of the thermal protection they offered when dry, and the bamboo derived fabric lining inside provides excellent thermal protection.
  • -10%

COOKIE 57 MM

DTD
€0.70 -10% €0.63

DTD Non-directive line marker- cookie, for marking important places in tech diving, diameter 57 mm.

  • -10%

REM LINE MARKER

DTD
€0.70 -10% €0.63

DTD Rectangular line marker - REM (Reference Exit Marker), length 65 mm, width 40 mm, thickness 3 mm.

  • -10%

ARROW 87 MM

DTD
€0.80 -10% €0.72

Large arrow for cavedivers, length is 87 mm, width 57 mm.

  • -10%

STAINLESS STEEL M8 WASHER

TDS

Not available in this country.

tds stainless steel m8 washer: Flat tds washer made of stainless steel for M8 fasteners used in backplates, rings and single tank adapters.

M8 NUT S.S.

TDS

Not available in this country.

Stailess steel M8 nut. To set at M8 screws.

PLASTIC CARABINER FOR BUNGEE 5 MM

TDS

Not available in this country.

Plastic hook to place at the end of a 5 mm rubber band. It is very useful in accessories like wetnotes, pencils, computers ... etc to keep seuros, but also operational without his ring drop.

STAY SPACE WASHER RECTANGULAR

10BAR
€2.00 -50% €1.00
Outlet
VIEW OUTLET

Stay space washer 10 Bar rectangular for stays in uderwater photography gear.

Outlet
VIEW OUTLET
  • -50%

ARROW 65 MM

DTD
€1.40 -10% €1.26
Outlet
VIEW OUTLET

Small arrow for cavedivers, useful for marking line, etc. Length is 65 mm, width 40 mm.

Outlet
VIEW OUTLET
  • -10%

O-RING FOR PUCK COMPUTER

MARES

Not available in this country.

Replacement O-Ring for Mares Puck Diving computer

D RING 50 MM S.S.

TDS

Not available in this country.

D ring 50 mm long stainless steel. Essential for the assembly of harnesses in technical diving.

Outlet
VIEW OUTLET

M8 SCREW S.S. 30 MM

TDS

Not available in this country.

Stainless steel M8 screw and 30mm long. To attach the single tank adapter to the back plate, and for many other uses.

M8 WINGNUT S.S.

TDS

Not available in this country.

Stainless steel M8 wingnut to adjust the screws to the back plate and mount the twin cylinders or single tank adapter.

ELASTIC CORD - BUNGEE 6 MM (1 M)

TDS

Not available in this country.

tds elastic cord bungee 6 mm by meters:Elastic cord - bungee type 6 mm thick for many uses both in technical diving, as recreational: 2nd stage hang neck, fastening computers, tanks, sidemount ... etc. Color Black. Sold by meters

CHEMICAL LIGHT

SUBACQUA

Not available in this country.

Chemical light signaling stick. Simply break internal capsule, shake and looks between 8 to 12 hours. Ideal for marking a position on land and underwater

M8 SCREW S.S. 40 MM

TDS

Not available in this country.

TDS Stainless steel M8 screw and 40mm long. To attach the single tank adapter to the diving back plate, and for many other uses.

M8 SCREW S.S. 25 MM

TDS

Not available in this country.

Stainless steel M8 screw and 25mm long. To attach the single tank adapter to the back plate.

JET FIN BUCKLE S.S (PAIR)

TDS

Not available in this country.

Stainless steel TDS buckle for Jet Fin type dive fin. Spare part that adjusts the rubber strap on jet fins. Includes 2 units

Outlet
VIEW OUTLET

STAY SPACE WASHER ROUND

10BAR
€2.00 -10% €1.80

Rouded Stay space washer 10 Bar for stays in uderwater photography gear.

  • -10%

ALUMINIUM WHISTLE

DTD
€2.50 -20% €2.00

Red aluminium whistle for acoustic signal at surface. With keychain ring.

  • -20%