SONY DSC HX90V HOUSING
There's no greater assurance than being able to see the o-ring seal. Simply close the two double-passivated stainless steel locking lid snaps, and see the o-ring form a solid black, watertight seal. Large, easy-to-reach controls are provided for all important camera functions including the rear dial.
Ikelite products are designed, built and tested in the USA. We use locally sourced, top-grade materials. Our housings are built by hand and individually tested for fit, function and waterproof integrity. We back our products with over 50 years of experience and service within the dive industry.
An included flash diffuser improves lighting quality when the camera's built-in flash is used. A built-in flash is effective between 1-3 feet (0.3-0.9m) from the subject in clear conditions. For best results a color correcting filter or external lighting is recommended. External lighting is more powerful and can be placed in a position to virtually eliminate the backscatter - or "snow" - from your underwater images.
Two ports are provided for the attachment of Ikelite, SEA&SEA, and Olympus-type fiber optic cables. Alternatively, optional AF35 strobe triggers and provides automatic TTL exposure by watching the camera's built-in flash, without the need of fiber optic cords or sensors.
The housing port is designed to accept color filter, wide angle, and macro options for 3.9-inch diameter ports. Light is absorbed very quickly as it passes through water. A subject will look darker, less colorful and somewhat grainy when viewed through even a few feet of water. The addition of a compatible wide angle accessory expands the camera's field of view underwater, providing the opportunity to get as close as possible to the subject and reduce the amount of water light passes through. The results speak for themselves - photos with the best color, exposure and clarity possible.
- 200 ft (60m) depth rating
- Controls for all important camera functions
- Controls are not provided for Flash pop-up switch, Viewfinder pop-up switch
- Near neutral buoyancy in fresh water
- 1/4-20 thread tray mounting with 3 in (76mm) spacing
- Weight 3.0 lb (1360 g)
- Dimensions 6.8 x 5 x 5.8 in (173 x 127 x 147 mm)
- 3.9-inch diameter glass lens port
- Port cover
- Flash diffuser
- Flash deflector
- Silicone lubricant 1cc tuve
IMPORTANT NOTE OF WARRANTY:
These housings have their mandatory legal warranty against manufacturing defects. However it is noted that this warranty does not cover any damages that may suffer the camera or device housed inside or flood water from entering it.
To ensure this guarantee, and although each unit has passed the mandatory quality controls, the manufacturer recommends a test dive with empty housing to verify proper operation and sealing to detect, if any, possible defects or flooding . If there is a defect, such a guarantee would act replacing the defective housing for a new, factory preflight. It is the responsibility of the user to perform this test.
Once this test is deemed to housing work properly, and, based on that of any subsequent flooding will be awarded to accidental errors in handling by the user.
Therefore the warranty does not cover damage to devices introduced into the housing, considering the customer's responsibility to have previously tested the casing to check for possible defects.
- TYPE OF HOUSING
- CAMERA BRAND
- UNDERWATER HOUSINGS
- PHOTO HOUSINGS
- BUILT IN MATERIAL
- WORKING DEPTH
- 60 M
- EXTERNAL STROBE CONNECTION
- LEAK ALARM
- NO ALARM
- CLOSURE SYSTEM
- WITH SECURITY BLOCK
- ARM SYSTEM
- CAMERA CONTROLS
- CAMERA DISPLAY
- DISPLAY WITH NO VIEWFINDER
- VACUM SYSTEM
- SYSTEM NOT INCLUDED