List of products by brand MARES

Composition Set: 2 x Dr Second Stages, 2 x 25Xr first Stages, 2 x Hoses (56 cm - 210 cm), 1 x Neck Bungee, 1 x Dead Bolt Snap

Mares XR 25 XR CR full set regulator for tek diving: The Mares XR CR Second Stage regulator is a high performance tec regulator which has been specifically designed for cave dives. Can be opened underwater for cleaning and easily reconstructed.

The Mares XR 25XR first stage is extremely reliable and environmentally sealed- great for keeping out water. With an interchangeable port design to offer perfect SPG instrument positioning.

The Mares XR 28XR AST is a technical first stage ideal for sidemount regulators, backmount regulators and stage regulators.

Mares XR 28XR HR regulator sidemount full set: Mares XR dedicated regulator for sidemount in a full set.

Mares XR 28XR HR Tek diving regulator: Our first dedicated regulator for stages

Mares XR 75 XR DR Regulator full tek set: This set combines the 75XR first stage, designed for demanding dives, with the resistant DR Deep Reg Second Stage - a sturdy tec set.

Mares XR 75 XR AST First Stage: The 75XR AST first stage has been design to withstand cold waters, extreme depth and demanding dives - with patented AST Auto Sealing Technology!

Mares abys 22 navy ii regulator: The new Mares Abyss 22 Navy II is the Mares answer for your challenge in every condition. With careful analysis and evaluation of what happens in cold water, Mares has designed an exclusive product accurately studied to guarantee top performance and reliability under the toughest conditions, including diving under the ice.

6061 marine grade anodiced aluminium alloy, 13 laser cut and laser etched slots, 8 slots specially designed for optimum positioning of the harness webbing, 2 upper and 2 lower slots for nylon cylinder bands so a single cylinder can be strapped directly, Having only 2 slots provides enough lateral cylinder stability without weakening the strength of the spine

Mares Apnea Instintc 50 Open Cell Hooded Vest: The Mares Apnea Instinct 50 is a 2-piece suit (sold separetly) made in 5mm lined black neoprene with an open-cell interior. The mix of neoprene is very elastic and resistant to wear during the most challenging dives!

Mares Apnea Instintc 50 Open Cell Hooded Vest: The Mares Apnea Instinct 50 is a 2-piece suit (sold separetly) made in 5mm lined black neoprene with an open-cell interior. The mix of neoprene is very elastic and resistant to wear during the most challenging dives!

mares apnea instintc 50 open cell pants: The Mares Apnea Instinct 50 is a 2-piece suit (sold separetly) made in 5mm lined black neoprene with an open-cell interior. The mix of neoprene is very elastic and resistant to wear during the most challenging dives!

mares apnea instintc 50 open cell pants: The Mares Apnea Instinct 50 is a 2-piece suit (sold separetly) made in 5mm lined black neoprene with an open-cell interior. The mix of neoprene is very elastic and resistant to wear during the most challenging dives!

mares apnea infinity 30 wetsuit: The Mares Apnea Infinity 30, of 3 mm thickness, made with shapes and cuts in two versions, men and women, is a one piece wetsuit, with separated cap, made with Outdoor apnea in mind. The materials and shapes used permit great comfort even in positions of great extension, as when diving in the typical position with arms stretched above the head. This is possible mainly thanks to the internal lining of the neoprene, called Ultrastretch, used in the areas of maximum tension, such as underarms on the side of the thorax, the base of the rear zip, and, to obtain maximum comfort, on the neck and the lateral panels of the separated cap. Compared to traditional linings, the Ultrastretch is modified both in the material and the weaving, to obtain maximum elongation in all directions. Moreover, the neoprene used, characterized by high resistance to tear and squeeze, and also elevated thermal comfort, has a specific superficial treatment, where the external smooth surface is not vulcanized, but made with polyurethane.

mares apnea instinct 17 hooded vest: The Mares Apnea Instinct 17 is available in both male and female versions, created with the same innovative neoprene as the Apnea Infinity but with a thickness of 1.7mm. Developed with a preformed cut and special white graphics which make it particularly attractive.

mares apnea instinct 17 hooded vest: The Mares Apnea Instinct 17 is available in both male and female versions, created with the same innovative neoprene as the Apnea Infinity but with a thickness of 1.7mm. Developed with a preformed cut and special white graphics which make it particularly attractive.

mares apnea instinct 17 pants: The Mares Apnea Instinct 17 is available in both male and female versions, created with the same innovative neoprene as the Apnea Infinity but with a thickness of 1.7mm. Developed with a preformed cut and special white graphics which make it particularly attractive.

mares apnea instinct 17 pants: The Mares Apnea Instinct 17 is available in both male and female versions, created with the same innovative neoprene as the Apnea Infinity but with a thickness of 1.7mm. Developed with a preformed cut and special white graphics which make it particularly attractive.

mares apnea instinct 30 hooded vest: The Mares Apnea Infinity 30, of 3 mm thickness, made with shapes and cuts in two versions, men and women, is a one piece wetsuit, with separated cap, thought for outdoor apnea. The materials and shapes used permit comfort even in positions of great extension, such as when diving in the typical position with arms stretched above the head. This is possible mainly thanks to the internal lining of the neoprene, called Ultrastretch, used in the areas of maximum tension, such as underarms on the side of the thorax, the base of the rear zip, and, to obtain maximum comfort, on the neck and the lateral panels of the separated cap. Compared to traditional linings, the Ultrastretch is modified both in the material and the weaving, to obtain maximum elongation in all directions. Moreover, the neoprene used, characterized by high resistance to tear and squeeze, and also elevated thermal comfort, has a specific superficial treatment, where the external smooth surface is not vulcanized, but made with polyurethane.

mares apnea instinct 30 hooded vest: The Mares Apnea Infinity 30, of 3 mm thickness, made with shapes and cuts in two versions, men and women, is a one piece wetsuit, with separated cap, thought for outdoor apnea. The materials and shapes used permit comfort even in positions of great extension, such as when diving in the typical position with arms stretched above the head. This is possible mainly thanks to the internal lining of the neoprene, called Ultrastretch, used in the areas of maximum tension, such as underarms on the side of the thorax, the base of the rear zip, and, to obtain maximum comfort, on the neck and the lateral panels of the separated cap. Compared to traditional linings, the Ultrastretch is modified both in the material and the weaving, to obtain maximum elongation in all directions. Moreover, the neoprene used, characterized by high resistance to tear and squeeze, and also elevated thermal comfort, has a specific superficial treatment, where the external smooth surface is not vulcanized, but made with polyurethane.

mares apnea instinct 30 pants: The Apnea Infinity 30, of 3 mm thickness, made with shapes and cuts in two versions, men and women, is a one piece wetsuit, with separated cap, thought for outdoor apnea. The materials and shapes used permit comfort even in positions of great extension, such as when diving in the typical position with arms stretched above the head. This is possible mainly thanks to the internal lining of the neoprene, called Ultrastretch, used in the areas of maximum tension, such as underarms on the side of the thorax, the base of the rear zip, and, to obtain maximum comfort, on the neck and the lateral panels of the separated cap. Compared to traditional linings, the Ultrastretch is modified both in the material and the weaving, to obtain maximum elongation in all directions. Moreover, the neoprene used, characterized by high resistance to tear and squeeze, and also elevated thermal comfort, has a specific superficial treatment, where the external smooth surface is not vulcanized, but made with polyurethane

mares apnea instinct 30 pants: The Apnea Infinity 30, of 3 mm thickness, made with shapes and cuts in two versions, men and women, is a one piece wetsuit, with separated cap, thought for outdoor apnea. The materials and shapes used permit comfort even in positions of great extension, such as when diving in the typical position with arms stretched above the head. This is possible mainly thanks to the internal lining of the neoprene, called Ultrastretch, used in the areas of maximum tension, such as underarms on the side of the thorax, the base of the rear zip, and, to obtain maximum comfort, on the neck and the lateral panels of the separated cap. Compared to traditional linings, the Ultrastretch is modified both in the material and the weaving, to obtain maximum elongation in all directions. Moreover, the neoprene used, characterized by high resistance to tear and squeeze, and also elevated thermal comfort, has a specific superficial treatment, where the external smooth surface is not vulcanized, but made with polyurethane