Wrist compass with a new bungee support system , very safe, easy and fast to install, bungee type support fits snugly to the wrist regardless of the suit being used.

TDS Scuba Diving Wrist Compass: A must for all diver orientation accessory. Bezel to memorize directions on surface and underwater. It contains brands for direct and reverse course.The unique tilt allows the compass readings make angles up to 30 degrees and continue to respond quickly and accurately.

Designed with readability in mind, Aqua Lung’s Compass is perfect for navigation under any conditions.

Designed with readability in mind, Aqua Lung’s Compass is perfect for navigation under any conditions. Hose mount system

Apeks Bungee mount Scuba Diving Compass: The Apeks Bunguee compass is a wrist compass. An elastic strap holds it securely in place even when your semi-stretch or drysuit suffers from the effects of compression with depth.

Lifeline Nautilus Radio Beacon GPS AIS: Your GPS position accurate to 1.5 metres and a man overboard distress message will be broadcast to all AIS equipped ships up to 34 miles away as well as a special DSC message to the marine radio on your own vessel.

Transfer device to equalize pressures of bottles and / or transfer of gas to make mixtures. DIN 300 connections on both ends (also engages taps DIN 200), pressure gauge and purge control knob fitting for comfort. Approximate length of the hose: 1 m

Transfer device to equalize pressures of bottles and / or transfer of gas to make mixtures. INT abutment connections at both ends, pressure gauge and purge control knob fitting for comfort. Approximate length of the hose 1 m.

Metalic decanting device for oxygen. Purge tap. With pressure gauge to control the amount of transferred gas. DIN 200/300 connections at both ends. Hose length 2 m approx.

Metalic decanting device for oxygen, with relieving pressure valve, 2m hose, pressure gauge and DIN 200/300 filling connection at both sides.

TDS Oxygen & Air Metalic decanting hose with digital pressure gauge and valve for technical scuba diving: TDS Metalic decanting device for oxygen, with relieving pressure valve, 100 mm hose, digital pressure gauge and DIN 200/300 filling connection at both sides.

TDS Oxygen metalic decanting hose with digital pressure gauge and valve: TDS Metalic decanting device for oxygen, with relieving pressure valve, 100 mm hose, digital pressure gauge and DIN 200/300 filling connection at both sides.

Surface gauge for checking pressure out of the water bottles. DIN system. Purge by knob. Dial easy to read. Scale up to 400 bar. Is clean for use with oxygen, but if used with air the O2 service is lost.

Low pressure gauge with connection to bc hose. It is used to check the outlet pressure of the first stage regulators. Must in any technical service.

TDS diving pressure gauge pony type, reduced size, which is placed directly on an HP output of the first stage without hose. Widely used in the stage tanks regulators to control gas in them, reducing the size of the installation and minimizing potential failure points, such as HP hoses.

The VN202 MKII is a small lightweight handheld instrument has been specifically designed, by Nitrox divers who have over 25 years experience of Oxygen monitoring, for the diving environment. The VN202 MKII has a degree of 'Water Proofing' which although not guaranteed to be 100% waterproof it should survive exposure to the severe splashing encountered by divers.

Divesoft Solo O2 Oxygen Analizer for Technical Scuba Diving: A smart and accurate NITROX analyzer that offers simple oxygen measurement and advanced features.  Analyzer SOLO O2 is the ideal partner for all recreational NITROX divers. Analyzing is really easy, just turn on with one press and measure. Easy automatic calibration. Analyzer SOLO O2 has the same durable polymer body as its brother Analyzer SOLO, allowing you to get the device upgraded to a trimix analyzer by getting a helium sensor added.