Lp inflator for wings or jacket with plastic buttons. Material: reinforced techno polymer characterized by glass charges, polyamid and stainles steel. Weight: 0,11 kg
tds flat overpressure dump valve: tds Pressure relief - dump valve for wings and BCDs. The main feature is his very low profile, making the valve almost not protrude from the profile of the wing or jacket, favoring hydrodynamics and protecting it from blows.
tds dump valve closure cap: Closure cap for closing / annuling quick dump valves on wings or BCs.Compatible with most wing and BC valves on the market.
Stainless steel spring for jet fin fins type . The adjusto to the fin is made by a stainless steel screw with security nut. Add strength, durability and safety to the fins
The bungee connector system has been designed as a neat storage solution for your backup regulator and can be configured according to a diver's personal preference. The system also has a lock out feature for retaining a regulator in the mouth of an unconscious diver during a rescue situation.
Stainless steel spring for jet fin fins type . The adjust to the fin is made by a stainless steel buckle and pressure adjust. Add strength, durability and safety to the fins
Stainless steel TDS buckle for Jet Fin type dive fin. Spare part that adjusts the rubber strap on jet fins. Includes 2 units
TDS ZS2 scuba Diving Fin Spring: Stainless steel spring for tds zs2 fins. The adjustment to the fins is made with the quick release buckle. Can be compatible with other fins with similar buckle (see picture).They provide strength, durability and safety to the fins.
Tube of oxygen compatible grease for scuba diving, for lubricating Viton O-rings or surfaces that are to be exposed to contact with this gas. Necessary in all scuba diving regulators that are in oxygen service, and essential in the maintenance of any model of Rebreather.
Decorative patch for bags, suits, caps...etc with TDS logo in Grey on black background. Velcro fastening
Decorative patch for bags, suits, caps...etc with TDS logo and emblem of a frog skeleton with trident, in Grey on black background. Velcro fastening
Carrying case with everything you need to service TDS & similars BPI - low pressure inflators. Includes: Pliers with rounded tips. Cone for inflator button gasket Bush wrench Silicone lubricant 5 mm hexagon socket Set of O-rings in different sizes Plastic flanges.
Replacement bladder for the TDS Iron 20 technical diving wing. Circular design in heat-sealed cordura. Base for welded valves and trachea.
Mouthpiece in black silicone with molded part for the palate. Provides a more anatomical fit for the mouth and avoiding having to bite harder to hold in possition.
O-rings box Viton 85 material shore A hardness, compatible with oxygen; with 14 different sizes and 10 units of each measure.
Stainless steel bolt snap type with oval swivel eye, 120 mm 1 1/4"
Cookie preferences
Not available in this country.
