Minimalist Cressi Dyneema Abellan howitzer for assembly of rubbers with strips and without screwed bushings. It has a tempered stainless steel clamp and a stainless steel sphere of 7 mm diameter, which allows the assembly even on thin rubbers without difficulties to introduce the howitzer in the rubber’s tube and avoiding an extremely forcing of the sphere to the rubber in the critical point of constriction with the rope.

Minimalist Cressi Dyneema Conic wishbone for assembly of rubbers with strips and without bushings. It’s recommended for all kinds of metro rubbers but especially for the ones of reduced diameter because of the peculiarities of its elegant design. Mechanized in one piece of AISI 316 steel.

A low acidity detergent (pH 5.5) polyvalent for cleaning the neoprene elements and for the placement of microporous suits avoiding skin irritations.

Cressi diving, spearfishing and freediving belt with stainless steel buckle with bright polishing finish and nylon strap. Maximum construction quality: plate of 1.2 mm thickness, rounded profiles, hinge security system with rivets. Patterned logo.

Cressi Deodorant Cleaner 1 l: Presentation in "Individual" format of this powerful concentrated enzymatic deodorant, designed to eliminate odors and 100% disinfect the neoprene elements of the dive gear. A single dose of 50ml is considered the quantity needed for a 100L water bucket.

Cressi Templa Shaft 6.50 mm: Cressi Templa rod for speargun made with finishing parameters and very restricted dimensions to obtain a maximum adaptation to all type of mechanisms. Mechanism made of stainless steel tools “hard metal” to avoid the pollution of the rod material and possible rust spots of the machined zones

Cressi Templa Shaft 6.50 mm: Cressi Templa rod for speargun made with finishing parameters and very restricted dimensions to obtain a maximum adaptation to all type of mechanisms. Mechanism made of stainless steel tools “hard metal” to avoid the pollution of the rod material and possible rust spots of the machined zones

Cressi Templa Shaft 6.50 mm: Cressi Templa rod for speargun made with finishing parameters and very restricted dimensions to obtain a maximum adaptation to all type of mechanisms. Mechanism made of stainless steel tools “hard metal” to avoid the pollution of the rod material and possible rust spots of the machined zones

Cressi Templa Shaft 6.50 mm: Cressi Templa rod for speargun made with finishing parameters and very restricted dimensions to obtain a maximum adaptation to all type of mechanisms. Mechanism made of stainless steel tools “hard metal” to avoid the pollution of the rod material and possible rust spots of the machined zones

Cressi Templa Shaft 6.50 mm: Cressi Templa rod for speargun made with finishing parameters and very restricted dimensions to obtain a maximum adaptation to all type of mechanisms. Mechanism made of stainless steel tools “hard metal” to avoid the pollution of the rod material and possible rust spots of the machined zones

Cressi Templa Shaft 6.50 mm: Cressi Templa rod for speargun made with finishing parameters and very restricted dimensions to obtain a maximum adaptation to all type of mechanisms. Mechanism made of stainless steel tools “hard metal” to avoid the pollution of the rod material and possible rust spots of the machined zones

Cressi Templa Shaft 6.50 mm: Cressi Templa rod for speargun made with finishing parameters and very restricted dimensions to obtain a maximum adaptation to all type of mechanisms. Mechanism made of stainless steel tools “hard metal” to avoid the pollution of the rod material and possible rust spots of the machined zones

Cressi Templa Shaft 6.50 mm: Cressi Templa rod for speargun made with finishing parameters and very restricted dimensions to obtain a maximum adaptation to all type of mechanisms. Mechanism made of stainless steel tools “hard metal” to avoid the pollution of the rod material and possible rust spots of the machined zones

Cressi Templa Shaft 6.50 mm: Cressi Templa rod for speargun made with finishing parameters and very restricted dimensions to obtain a maximum adaptation to all type of mechanisms. Mechanism made of stainless steel tools “hard metal” to avoid the pollution of the rod material and possible rust spots of the machined zones

Cressi spare Flap for Speargun rod, available in 60 mm and 75 mm length in two versions, prepared to join the rods between Ø6 – 6.50 mm and between Ø6.50 – 7 mm diameters. AISI 301 steel of 1mm thickness for a maximum resistance. 

Cressi Trevira Wihte Line 1.5 mm 50 m: 100% polyester of high tenacity, waterproof and with high resistance to breaks and erosion. Really polyvalent because its relationship resistance-diameter-price.

Cressi Dyneema Brown Rope 2 mm 50 m Spearfishing: Pure high resistance Cressi Dyneema rope (200 kg) perfect for use in reel, spear gun or for DIY. White color.

Pure high resistance Cressi Dyneema rope (195 kg) perfect for use in reel, spear gun or for DIY. White color.

Mares Freediving & Spearfishing Collar Weight System: Mares Freediving collar weight system. The individual weights are white, for providing maximum visibility even underwater. The individual weights of 300 g can be connected to each other.

TDS Scuba Diving Mask Strap Transparent silicone 16 mm: Mask strap in white silicone. Valid for many market mask models.20 mm wide.

Special neoprene support to attach to the wrist by Velcro, which allows to mount TDS Maru, S1000, V10 and diving flashlights or similar sizes diving lights, leaving the hand to continue working with it. Very comfortable when focusing and transporting the lighting during the dive.