WTX-D30 WING 15 L

APEKS
€479.00 -20% €383.20

The WTX and WTX-D Series is a selection of harnesses, buoyancy cells and accessories which offer unparalleled versatility due to the modular nature of the whole system. Each component can be configured into a highly technical rig for those trained to push the limits, or scaled down to make a travel friendly set up suitable for any diver

  • -20%

WTX-D18 WING 8 L

APEKS
€449.00 -20% €359.20

The WTX and WTX-D Series is a selection of harnesses, buoyancy cells and accessories which offer unparalleled versatility due to the modular nature of the whole system. Each component can be configured into a highly technical rig for those trained to push the limits, or scaled down to make a travel friendly set up suitable for any diver

  • -20%

STREAM RING 20 WING COLORED

DTD
€304.00 -10% €273.60

Circular style wing for diving with doubles. STREAM RING 20 was designed for diving with double tanks from 2x7-2x12 and stage. Due to the small profile, along with sufficient lift, this wing is especially suitable for recreational and also tec diving.

  • -10%

M8 SCREW S.S. 30 MM

TDS
Stainless steel M8 screw and 30mm long. To attach the single tank adapter to the back plate, and for many other uses.

ARMADILLO BACK PAD

DTD
€41.00 -10% €36.90
Additional rear part of backplate for attaching the sidemount bottles.Material: Cordura 1100, webbing, stainless-steel AISI 316. Weight: 0,28 kg
  • -10%

AIR/OXYGEN METALIC DECANTING HOSE DIGITAL...

TDS

TDS Oxygen & Air Metalic decanting hose with digital pressure gauge and valve for technical scuba diving: TDS Metalic decanting device for oxygen, with relieving pressure valve, 100 mm hose, digital pressure gauge and DIN 200/300 filling connection at both sides.

M8 NUT S.S.

TDS
Stailess steel M8 nut. To set at M8 screws.

STAINLESS STEEL M8 WASHER

TDS
tds stainless steel m8 washer: Flat tds washer made of stainless steel for M8 fasteners used in backplates, rings and single tank adapters.

PLASTIC ADAPTER FOR TWIN (Unit)

TDS
Plastic piece to join two cylinders and asembly a twin with straps (straps not included). Sold unit.
Outlet
VIEW OUTLET

R17 SENSOR FOR VN202 OXYGEN ANALYZER

VANDAGRAPH
€122.50 -20% €98.00

Oxygen sensor for Vandagraph VN202 analyzers and TEK-OX models. It is also compatible with. MSA MiniOX, Dive Rite VTI, AD300 and Teledyne MD300. Jack type connection.

  • -20%

NRC PICK O2 OXYGEN ANALIZER

NRC
€240.00 -20% €192.00
Portable oxygen analyzer small sized, to measure the oxygen concentration. Measurement Range: 0-99 vol% O2 Resolution: 1 Vol%. Measuring Time: 1 Sec
  • -20%

TEK OX OXYGEN MONITORING

VANDAGRAPH
€350.00 -20% €280.00
Oxygen analyzer for use with one hand, and designed specifically for the heavy conditions on the marine environment. Waterproof .Large digits
  • -20%

QUICK-LINK S.S.

DTD
€3.50 -10% €3.15
Quick-Link stainless-steel, dimensions 36 x 17 mm, thickness 3,5 mm, opening max 5 mm.
  • -10%

JET FIN STRAP BLACK (2 Unt)

TDS

Replacement strip part for rubber fins models like Jet Fin model in black color.2 Units included.

NITROX TANK DECAL

TDS

TDS Nitrox Scuba Diving Tank Decal: Tds nitrox identification sticker to put on bottles Nitrox tanks and make a perfect identification and distinction from other bottles. Dimensions 60 cm x 15 cm

OXYGEN 300 BAR CONECTION W 30x2 (Ref 1134)

TECNOMAR
€100.00 -10% €90.00
Oxygen cylinder connection 300 B (W 30x2). With coupling to DIN 200/300 allows oxygen transfer oxygen cylinders with 300 bar DIN connections transfer device 200 or 300Oxygen cylinder connection 300 B (W 30x2). With coupling to DIN 200/300 allows oxygen transfer oxygen cylinders with 300 bar DIN connections transfer device 200 or 300
  • -10%

FRAMELESS GORILLA MASK

SCUBAPRO
The stellar mask shares the same classic single lens design and long list of comfort and performance features as the original Frameless, but provides a slightly larger, wider lens and a slightly larger skirt in a matte finish for divers with larger or wider faces.

FRAMELESS CLASSIC MASK BLACK

SCUBAPRO

Single-lens mask featuring a unique assembly of lens and skirt without a frame. Original unique design for unbeatable comfort and fit and classic robust quality. Buckles positioned on exterior of mask body for convenience and comfort. Reduced weight, size and volume makes clearing water easy.

LP BC CONECTION PRESSURE GAUGE

TDS

Low pressure gauge with connection to bc hose. It is used to check the outlet pressure of the first stage regulators. Must in any technical service.

FS2 COMPASS W/ RETRACTOR

SCUBAPRO
FS-2 provides a unique tilt angle of at least up to 35 degrees, making it easier to read and operate in most any position. With a floating magnet separate from the compass rose, the FS-2 has a greater angle of operating freedom than conventional compasses

FS2 COMPASS

SCUBAPRO
FS-2 provides a unique tilt angle of at least up to 35 degrees, making it easier to read and operate in most any position. With a floating magnet separate from the compass rose, the FS-2 has a greater angle of operating freedom than conventional compasses.