tds inflator knee joint joint: tds Replacement inflator knee joint (elbow) to connect the inflation trachea hose with the wing bladder.Made of high strength plastic, it has reinforcing ribs to better resist knocks and traction.

Lp inflator for wings or jacket with plastic buttons. Material: reinforced techno polymer characterized by glass charges, polyamid and stainles steel. Weight: 0,11 kg

Tank strap that includes a heavy stainless steel buckle. It can be used with single tank adapters or in a conventional BCD.

tds elastic cord bungee 6 mm by meters:Elastic cord - bungee type 6 mm thick for many uses both in technical diving, as recreational: 2nd stage hang neck, fastening computers, tanks, sidemount ... etc. Color Black. Sold by meters

Red aluminium whistle for acoustic signal at surface. With keychain ring.

Circular style wing for diving with a single tank. Comes out from time proven double layer model CUB. Use for single tank 12 - 18 l. Part of the wing are also 2 pieces of rubber pins in the middle area of wing which allow to attach the single bottle WITHOUT the need to use single tank adapter.

Circular style wing for diving with a single tank. Comes out from time proven double layer model CUB. Use for single tank 12 l. Part of the wing are also 2 pieces of rubber pins in the middle area of wing which allow to attach the single bottle WITHOUT the need to use single tank adapter.

2 litre Steel Oxygen Cylinder: WP 232 Bar, M25 x 2, c/w Oxygen Sticker. M26 Rebreather Oxygen Cylinder Valve (2008 on Euro Spec): oxygen clean, M26 outlet, green hand wheel and green bump cap

Circular style wing for diving with a single tank. Comes out from time proven double layer model CUB. Use for single tank 12 - 18 l. Part of the wing are also 2 pieces of rubber pins in the middle area of wing which allow to attach the single bottle WITHOUT the need to use single tank adapter.

Circular style wing for diving with a single tank. Comes out from time proven double layer model CUB. Use for single tank 12 l. Part of the wing are also 2 pieces of rubber pins in the middle area of wing which allow to attach the single bottle WITHOUT the need to use single tank adapter.

Circular style wing for diving with doubles. STREAM RING 20 was designed for diving with double tanks from 2x7-2x12 and stage. Due to the small profile, along with sufficient lift, this wing is especially suitable for recreational and also tec diving.

The DTD Stream 20 CCR wing is especilly designed for diving with CCR rebreathers.

Equipped with hard metal back (stainless steel), they are designed for technical divers that enjoy the deep dives with big or double cylinders that need more thrust.

The WTX and WTX-D Series is a selection of harnesses, buoyancy cells and accessories which offer unparalleled versatility due to the modular nature of the whole system. Each component can be configured into a highly technical rig for those trained to push the limits, or scaled down to make a travel friendly set up suitable for any diver.

The WTX and WTX-D Series is a selection of harnesses, buoyancy cells and accessories which offer unparalleled versatility due to the modular nature of the whole system. Each component can be configured into a highly technical rig for those trained to push the limits, or scaled down to make a travel friendly set up suitable for any diver

The WTX and WTX-D Series is a selection of harnesses, buoyancy cells and accessories which offer unparalleled versatility due to the modular nature of the whole system. Each component can be configured into a highly technical rig for those trained to push the limits, or scaled down to make a travel friendly set up suitable for any diver

Circular style wing for diving with doubles. STREAM RING 20 was designed for diving with double tanks from 2x7-2x12 and stage. Due to the small profile, along with sufficient lift, this wing is especially suitable for recreational and also tec diving.

2 litre Steel Oxygen Cylinder: WP 232 Bar, M25 x 2, c/w Oxygen Sticker. Rebreather Oxygen Cylinder Valve: oxygen clean, DIN 5/8" BSP outlet, green hand wheel and green bump cap

3 litre Steel Cylinder: WP 232 Bar, M25 x 2, c/w Diluent Sticker. Rebreather Diluent Cylinder Valve: DIN 5/8" BSP outlet, black hand wheel and black bump cap, M25 x 2 ISO

Reel spool type made of high strength plastic, redesigned side holes thats reduces weight and facilitates the carabiner hooking to retain the rope. Includes 45 m high visibility orange wire. Stainless Steel double bolt snap trigger included.

Valve with M25x2 thread EN144 bottle, M26x2 output with a 232 atm working pressure. Elongated green plastic knob. Especially for stage cylinders. The valves are shipped with seals and lubricants compatible for oxygen.