Auto Closure Device (ACD) - keeps corrosive water out of the first stage inlet by automatically closing as the Legend is removed from the cylinder valve.This prevents internal lubrication from washing away. Safer for elevated percentages of oxygen.Unique over-balanced, diaphragm design results in superior performance at depth2 HP ports and 4 MP ports are angled for optimum hose routingAn environmental dry system keeps water out of the main spring chamber thus preventing ice buildup and keeping silt and contamination outAvailable in your choice of yoke or DIN connectorsCompatible with up to 40% O2 right out of the box.
- Master Breathing System (MBS) - The MBS is a new, simple and effective way to adjust the breathing performance of your Legend LUX. The MBS controls two functions at one time. It controls the direction of air, which alters the venturi effect, as well as changes the opening effort. One control – two functions, it doesn’t get easier.
- Pneumatically-balanced second stage results in smooth, easy breathing.
- The Comfobite™ mouthpiece virtually eliminates jaw-fatigue.
- Heat exchanger (patented) which surrounds the valve mechanism, dissipates the cold caused by gas expansion while drawing in the warmth of the ambient waterThe ergonomic exhaust tee channels the exhaust bubbles out of your field of vision.
- The design also contributes to a reduction in exhalation effort.
- Attached to a 29” braided Aqua Flex hose. These hoses are lightweight and extremely pliable which eliminates any tugging on the mouthpiece.
Producto fuera de stock. Consultar en los próximos: días de entrega
- FIRST STAGE
- FIRST STAGE
- COLD WATER KIT
- ADJUSTABLE 2ND STAGE
Thanks to a new technology created in the dental sector, it is now possible to have a custom fit mouthpiece. Simply immerse Jax in boiling water for a few seconds, bite down for a personalized mouthpiece and welcome to more comfortable and relaxing dives. Jax can be fitted on all Mares regulators.
Regulator mouthpiece made of PVC; something more rigid than traditional silicon, but much more durable texture.
Piece of hard plastic deformable with heat, which is standing on the top of the hoses to prevent bending. Blister with 2 units.
Mouthpiece in black or transparent silicone with molded part for the palate. It provides a more anatomical fit for the mouth and avoiding having to bite harder to hold in possition.
subacqua shark regulator mouthpiece: Resistant silicone mouthpiece with color inlaid reinforcement in the area of contact with the teeth. Valid for almost all models of market regulators and octopus. Available in transparent and black silicone.
subacqua comfort regulator mouthpiece: The Subacqua Comfort mouthpiece for regulator, is a customizable mouthpiece that allows perfectly fit the shape of the mouth, jaw and teeth, providing comfort and fit never seen before.
Octopus holder adaptable to all kinds of mouthpieces. Allows carriying the octopus and locate it at all times.Prevent the sand or other contaminants incoming.
Spare mouthpiece for the regulator. Made in silcone. Available in black or clear silicone.
A round bag for carrying a regulator and other equipment that is not excessively bulky. The main pocket, with a zip fastening, has been created to hold and protect the regulator. On the opposite side, a second zipped pocket holds a mesh extension that transforms the bag into a tall kitbag, with shoulder straps for carrying.
A round bag for carrying a regulator and other equipment that is not excessively bulky. The main pocket, with a zip fastening, has been created to hold and protect the regulator.
Pressure gauge up to 400 bar, with steel case and rubber sheath in green for nitrox-oxygen.
subacqua compact dual pressure gauge: subacqua compact dual Pressure Gauge with small size and easy reading. Dual scale for psi and bar readings.
Gauge pressure up to 400 bar, with steel housing and protective rubber boot. Very resistant socket with rubber rings on either side.
Multitool thats combining in one piece four keys and allen nut.
Rubber protective cap for INT valves. Absorbs impacts and prevents dirt inside.
Low pressure hose to inflate your jacket. Standard valve connection to BPI and LP 3/8 thread for connection to the first stage.
Second stage regulator swivel that allows hose at an angle of 120 degrees in a fixed possition.
In one tool: wrenches, screwdrivers, awl and allen keys.
Converting piece that screws on regulators with DIN 200 system, and converts into INT system. Very practical for trips where the taps of the bottles have INT system.
Silicone mouthpiece in smaller standard size, specially designed for kids or divers who are more compfortable with an small mouthpiece in his regulator.
Very easy to assembly in any regulator 2nd stage.
SCUBAPRO's Compact Pressure Gauge is an ideal travelling gauge or back-up instrument.
The TRAVEL REG BAG comes in a new "vintage" style commemorating SCUBAPRO's 50-plus years in diving. It features one large main compartment with straps to secure your reg while in transit. A clear zippered inside pocket allows you to store a logbook or any documents you might need while traveling
Pressure gauge with metal body and up to 400 bar scale, ultra-resistant and durable due to to the protective rubber that covers it. Includes 80 cm length high-pressure hose.
High quality pressure gauge with metal body and side handle, specially designed for diving in sidemount. Finished in metal and mineral glass. Scale up to 400 bar.
Pressure gauge in high quality metal housing and highly resistant mineral glass.Metalic and mineral glass finish.Scale up to 400 bar
High pressure hose for pressure gauge 15 cm length. Special to set the pressure gauge on the regulator of stage or bailout tank or in sidemount configurations.
On / off valve that opens or closes the air flow into the hose line where it is installed. Ideal to place on the second stage regulator due to its small size. Approximate length: 4.5 cm