Faber 12 liters container in long format and white color. CE approved and compliance with EN250 standard. The thread is M25x2 with standard EN144 rule. Work pressure of 232 bar. Not include valve.

tds flat overpressure dump valve: tds Pressure relief - dump valve for wings and BCDs. The main feature is his very low profile, making the valve almost not protrude from the profile of the wing or jacket, favoring hydrodynamics and protecting it from blows.

tds inflator knee joint joint: tds Replacement inflator knee joint (elbow) to connect the inflation trachea hose with the wing bladder.Made of high strength plastic, it has reinforcing ribs to better resist knocks and traction.

tds elastic cord bungee 6 mm by meters:Elastic cord - bungee type 6 mm thick for many uses both in technical diving, as recreational: 2nd stage hang neck, fastening computers, tanks, sidemount ... etc. Color Black. Sold by meters

Valve with M25x2 thread EN144 bottle, M26x2 output with a 232 atm working pressure. Elongated green plastic knob. Especially for stage cylinders. The valves are shipped with seals and lubricants compatible for oxygen.

Red aluminium whistle for acoustic signal at surface. With keychain ring.

Circular style wing for diving with a single tank. Comes out from time proven double layer model CUB. Use for single tank 12 - 18 l. Part of the wing are also 2 pieces of rubber pins in the middle area of wing which allow to attach the single bottle WITHOUT the need to use single tank adapter.

Lightweight model of RING wing for diving with single bottle. The same double-shell construction but the cover is made of lighter material Cordura 1000. Also the bottle strap buckles and the inflator end-piece are made from lighter material - high quality techno-polymer. Can be used with single bottle 12 l.

Circular style wing for diving with a single tank. Comes out from time proven double layer model CUB. Use for single tank 12 l. Part of the wing are also 2 pieces of rubber pins in the middle area of wing which allow to attach the single bottle WITHOUT the need to use single tank adapter.

Circular style wing for diving with a single tank. Comes out from time proven double layer model CUB. Use for single tank 12 - 18 l. Part of the wing are also 2 pieces of rubber pins in the middle area of wing which allow to attach the single bottle WITHOUT the need to use single tank adapter.

Circular style wing for diving with a single tank. Comes out from time proven double layer model CUB. Use for single tank 12 l. Part of the wing are also 2 pieces of rubber pins in the middle area of wing which allow to attach the single bottle WITHOUT the need to use single tank adapter.

Circular style wing for diving with doubles. STREAM RING 20 was designed for diving with double tanks from 2x7-2x12 and stage. Due to the small profile, along with sufficient lift, this wing is especially suitable for recreational and also tec diving.

The DTD Stream 20 CCR wing is especilly designed for diving with CCR rebreathers.

tds dsi tech wing 28 liters: Double-bladder all-back stabilizing jacket, Outer bag of CORDURA® 1000, Inner air cell of tear-proof polyurethane, radio frequency welded easily replaceable, Lift: 230 N (23,45 kg), Corrugated group with inox elements, Volume: 28 liters. CE certified according to Norms EN250 and EN1809

tds dsi tech wing 20 liters: Double-bladder all-back stabilizing jacket, Outer bag of CORDURA® 1000, Inner air cell of tear-proof polyurethane, radio frequency welded easily replaceable, Corrugated group with inox elements, Volume: 20 liters, Lift: 180 N (18.35 kg), CE certified according to Norms EN250 and EN1809

The WTX and WTX-D Series is a selection of harnesses, buoyancy cells and accessories which offer unparalleled versatility due to the modular nature of the whole system. Each component can be configured into a highly technical rig for those trained to push the limits, or scaled down to make a travel friendly set up suitable for any diver.

Valve with M25 thread and toroidal sealing bottles (not EN144), exit DIN / INT convertible by core with a 232 atm working pressure. Black plastic knob on the right and output for connection to modular manifold.

Fixed elbow to place between the second stage and the hose, which allows routing to 90 degrees. Made of chrome plated brass. Thread 9/16 "Male to 9/16" female.

Underwater slate, with a special shape that fits to the wrist or forearm and allows place with other instruments without any disturb.

Samsung 18650 Lithium Battery for TDS Maru / Dzenot diving led lights: Samsung Ion-Lithium battery 18650 type, compatible with TDS Maru and DZenot lights. It is also valid for other light models that uses this type of battery. Capacity: 2900 mAh, Voltage: 3.7 V