3 litre Steel Oxygen Cylinder: WP 232 Bar, M25 x 2, c/w Oxygen Sticker. Oxygen Clean Rebreather Cylinder Valve: DIN 5/8" BSP outlet, green hand wheel and green bump cap, M25 x 2 ISO

Faber 12 liters container in long format and white color. CE approved and compliance with EN250 standard. The thread is M25x2 with standard EN144 rule. Work pressure of 232 bar. Not include valve.

The TDS Gull bag has a PVC exterior which makes it extremely water and scuff resistant, while also allowing for easy cleanup if and when it does get wet. With rectangular form, interior padded, this is the perfect bag to transport your regulator and other small accessories between dives. This stylish bag also features a convenient handle and shoulder strap to make it that much easier to grab and go in a hurry.

tds flat overpressure dump valve: tds Pressure relief - dump valve for wings and BCDs. The main feature is his very low profile, making the valve almost not protrude from the profile of the wing or jacket, favoring hydrodynamics and protecting it from blows.

tds inflator knee joint joint: tds Replacement inflator knee joint (elbow) to connect the inflation trachea hose with the wing bladder.Made of high strength plastic, it has reinforcing ribs to better resist knocks and traction.

Tank strap that includes a heavy stainless steel buckle. It can be used with single tank adapters or in a conventional BCD.

5.7 liters (40 cubic feet) tank made of aluminum alloy 6061-T6. CE approval. Flat bottom. Dimensions: Diameter - 133.4 mm; Height - 645 mm. Weight: 7.3 kg

tds elastic cord bungee 6 mm by meters:Elastic cord - bungee type 6 mm thick for many uses both in technical diving, as recreational: 2nd stage hang neck, fastening computers, tanks, sidemount ... etc. Color Black. Sold by meters

Red aluminium whistle for acoustic signal at surface. With keychain ring.

Circular style wing for diving with a single tank. Comes out from time proven double layer model CUB. Use for single tank 12 - 18 l. Part of the wing are also 2 pieces of rubber pins in the middle area of wing which allow to attach the single bottle WITHOUT the need to use single tank adapter.

Lightweight model of RING wing for diving with single bottle. The same double-shell construction but the cover is made of lighter material Cordura 1000. Also the bottle strap buckles and the inflator end-piece are made from lighter material - high quality techno-polymer. Can be used with single bottle 12 l.

Circular style wing for diving with a single tank. Comes out from time proven double layer model CUB. Use for single tank 12 l. Part of the wing are also 2 pieces of rubber pins in the middle area of wing which allow to attach the single bottle WITHOUT the need to use single tank adapter.

Circular style wing for diving with a single tank. Comes out from time proven double layer model CUB. Use for single tank 12 - 18 l. Part of the wing are also 2 pieces of rubber pins in the middle area of wing which allow to attach the single bottle WITHOUT the need to use single tank adapter.

Circular style wing for diving with a single tank. Comes out from time proven double layer model CUB. Use for single tank 12 l. Part of the wing are also 2 pieces of rubber pins in the middle area of wing which allow to attach the single bottle WITHOUT the need to use single tank adapter.

Circular style wing for diving with doubles. STREAM RING 20 was designed for diving with double tanks from 2x7-2x12 and stage. Due to the small profile, along with sufficient lift, this wing is especially suitable for recreational and also tec diving.

The DTD Stream 20 CCR wing is especilly designed for diving with CCR rebreathers.

Equipped with hard metal back (stainless steel), they are designed for technical divers that enjoy the deep dives with big or double cylinders that need more thrust.

TDS DSI 20 l DIR Wing Backplate Inox & Harness for Tecnical Scuba Diving: Equipped with hard metal back (stainless steel or aluminum), they are designed for technical divers that enjoy the deep dives with big or double cylinders that need more thrust.

11.1 liters (80 cubic feet) tank made of aluminum alloy 6061-T6. CE approval. Flat bottom. Dimensions: Diameter - 184.2 mm; Height - 658 mm. Weight: 14.2 kg .200 Bar

Full set of twin cylinders, DIR configured according to standards and includes the following items:12 liters tanks in long format, working pressure 232 bar, thread M 25x2 tap EN144 and concave bottom, Twin cylinders valve with manilfold and isolation valve, Stainless steel rings 171 mm in diameter

Small arrow for cavedivers, useful for marking line, etc. Length is 65 mm, width 40 mm.

The AP Diving surface marker buoys can be inflated from a secondary air source, at any time during the dive to signal the end of it and mark the starting point .Also can be used as decompression globe.

Reel with a classic shape, manufactured from durable delrin. Delrin is used more and more often for manufacturing of diving equipment as its tensile properties, mechanical ruggedness and minimal absorbability. Weight: 1,18 Kg diameter: 140 mm width: 85 mm