3 L STEEL OXYGEN CYLINDER W/ VALVE
3 litre Steel Oxygen Cylinder: WP 232 Bar, M25 x 2, c/w Oxygen Sticker. Oxygen Clean Rebreather Cylinder Valve: DIN 5/8" BSP outlet, green hand wheel and green bump cap, M25 x 2 ISO
2 L STEEL OXYGEN CYLINDER W/ M26 VALVE
2 litre Steel Oxygen Cylinder: WP 232 Bar, M25 x 2, c/w Oxygen Sticker. M26 Rebreather Oxygen Cylinder Valve (2008 on Euro Spec): oxygen clean, M26 outlet, green hand wheel and green bump cap
MALE DIN 200 G5/8 TO FEMALE M26 CONVERTER
TWIN RIGHT VALVE M25 232 BAR WITHOUT CAP
Valve with M25 thread and toroidal sealing bottles (not EN144), exit DIN / INT convertible by core with a 232 atm working pressure. Black plastic knob on the right and output for connection to modular manifold.
MALE M26 TO DIN 200 G5/8 FEMALE CONVERTER
- -20%
90° LP SWIVEL
R22 VAN OXYGEN SENSOR FOR DIVESOFT
vandagraph r-22van oxygen sensor for divesoft: Vandagraph R-22VAN oxygen sensor, compatible with Oxyspy. NOTE: This sensor is not suitable for use with Rebreathers
- -20%
DECO BUOY 30 LB
The AP Diving surface marker buoys can be inflated from a secondary air source, at any time during the dive to signal the end of it and mark the starting point .Also can be used as decompression globe.
NON ISOLATION MANIFOLD (Various Sizes)
Without isolation valve manifold for mounting twins. Different measures depending on thecylinders of the set: 171 mm for 10/12 liters long twins, 203 mm for 12/15 liters twins
S80/S63 ALUMINIUM TANK BOTTOM
Tank bottom for aluminum tanks in S80 and S63 format. Protect the bottom of the bottles from bumps and scratches. Color: Black
2nd STAGE 90° REVOLVING CONNECTOR
Fixed elbow to place between the second stage and the hose, which allows routing to 90 degrees. Made of chrome plated brass. Thread 9/16 "Male to 9/16" female.
RIGHT VALVE DIN 200 1 EXIT
M26 OXYGEN VALVE 232 B
Valve with M25x2 thread EN144 bottle, M26x2 output with a 232 atm working pressure. Elongated green plastic knob. Especially for stage cylinders. The valves are shipped with seals and lubricants compatible for oxygen.
M25 TWIN RIGHT VALVE WO/ CAP 232 B
Valve with M25 thread and toroidal sealing bottles (not EN144), exit DIN / INT convertible by core with a 232 atm working pressure. Black plastic knob on the left and output for connection to modular manifold.
3 L STEEL DILUENT CYLINDER W/ VALVE
3 litre Steel Cylinder: WP 232 Bar, M25 x 2, c/w Diluent Sticker. Rebreather Diluent Cylinder Valve: DIN 5/8" BSP outlet, black hand wheel and black bump cap, M25 x 2 ISO
CCR M26 OXYGEN VALVE 1 EXIT
CCR M25 OXYGEN VALVE 1 EXIT
CCR M25 DILUENT VALVE 1 EXIT
KNOB W/INDICATOR
Knob for diving valve with opening indicator. When the tank is closed a red ring around appears, and when tank is open the ring is green.
GREEN KNOB
Valve knob made of green rubber, with a length greater than the usual knobs for easy opening and closing. They are compatible with most of the axes of the valves. Very used to distinguish decompression and rebreathers oxygen tanks.
2 X10/12 TWIN VALVE W/MANIFOLD & ISOLATOR
Twins valve for 10 or 12 liters in long form cylinders (171 mm diameter). With metric M25x2 EN144 thread . Manifold connection with isolation valve.
TWIN TANK STEEL 12 L DIR
Full set of twin cylinders, DIR configured according to standards and includes the following items:12 liters tanks in long format, working pressure 232 bar, thread M 25x2 tap EN144 and concave bottom, Twin cylinders valve with manilfold and isolation valve, Stainless steel rings 171 mm in diameter
- -20%