2nd Stage Suction Valve for Coltri Diving Compressors. P/N: 13-02-0044/R

2nd Stage Safety Valve for Coltri Diving Compressors. P/N: 13-00-0206

1st Stage Safety Valve for Coltri Diving Compressors. P/N: 13-00-0205

Maxifilter (without cartridge) black for Coltri diving Compressors. P/N: 13-00-0097/SS/R

Condensation discharge tap 1/8 for diving compressors Coltri

1.2 meter filling hose for diving cylinders refill for Coltri Hi Pressure Compressors

1/8 NPT -7/16  fitting for Coltri diving compressors

Cylinder connection valve with vent, shut-off valve and DVR connection Yoke INT, valid for Coltri diving compressors.

Cylinder connection valve with vent, shut-off valve and DVR connection DIN 300, valid for Coltri diving compressors.

Cylinder connection valve with vent, shut-off valve and DVR connection DIN 232, valid for Coltri diving compressors.

Complete automation set for Coltri MCH6/Icon portable diving compressors. Set Includes: Automatic condensate drain with timer for portable compressors P/N: SC000522, Autostop for portable compressors – 232 bar P/N: SC000521/232

Pressure gauge with bezel for Coltri scuba tank refill compressors. Scale 600 bar

Transmission belt for Coltri MCH13  Electric Three-Phase compressors. (Only belt, no pulley). P/N: CINGA71 | 13040374 (Old Code)

Transmission belt for Coltri MCH16  Electric Three-Phase compressors. (Only belt, no pulley). P/N: CINGA73 | 16040374 (Old Code)

Transmission belt for Coltri Portable MCH6/ Icon Electric Three-Phase MCH6/ Icon compressors. P/N: CINGA32

Transmission belt for Coltri Portable MCH6/ Icon Gasoline MCH6/ Icon compressors. P/N: CINGA31.5

Transmission belt for Coltri Portable Icon Electric Icon compressors. P/N: CINGA30

The standard Spare Air Pin Style Pressure Indicator shows when your Spare Air is ready for use.  The pressure indicator pin will extend flush with the top of the pressure indicator showing that the unit is full.  If pressure indicator pin is less than flush Spare Air is not full and needs to be filled to 3000 psi for maximum safety and number of breaths.  

This DIN style Refill Adapter allows you to fill your SPARE AIR / HEED directly from a full 3000 psi standard SCUBA tank. Easy to use. Easy to travel with .Either fill an empty SPARE AIR / HEED or top off air pressure to 3000 psi

The Leg3nd Elite Black Edition is the perfect combination of high function and stunning design. An aesthetic masterpiece made with stainless-steel parts, intuitive ergonomics are at your fingertips. Diving experts will appreciate the technical precision of this high-performance regulator.

The MTX-R Sidemount Assembly is a super tough, rugged, high performance sidemount regulator configuration designed to meet the rigors of cold water and extreme sidemount diving. The MTX-R is very reliable and also very easy to maintain in the field, making it an ideal choice for expedition and exploration divers.

O-rings extractors tool for the O-Ring extraction and replacement in regulators, housings, lights ... etc. Stainless Steel. Spiral head

Basis to eliminate completely the remaining ALR 5000 acid of the elements that have been in contact with it. Lightly mentholated. Reusable.

Soft acid perfect for oxide and lime removal, and all kinds of dirt of metallic elements (steel and chromed brass). It’s used reduced to 50%. Suitable both for direct use and ultrasound (isolate from the stainless steel sheet with a plastic or glass container).