STREAM RING 20 WING COLORED

DTD
€304.00 -10% €273.60

Circular style wing for diving with doubles. STREAM RING 20 was designed for diving with double tanks from 2x7-2x12 and stage. Due to the small profile, along with sufficient lift, this wing is especially suitable for recreational and also tec diving.

  • -10%

M8 SCREW S.S. 30 MM

TDS
Stainless steel M8 screw and 30mm long. To attach the single tank adapter to the back plate, and for many other uses.

M8 SCREW S.S. 25 MM

TDS
Stainless steel M8 screw and 25mm long. To attach the single tank adapter to the back plate.

ARMADILLO BACK PAD

DTD
€41.00 -10% €36.90
Additional rear part of backplate for attaching the sidemount bottles.Material: Cordura 1100, webbing, stainless-steel AISI 316. Weight: 0,28 kg
  • -10%

M8 NUT S.S.

TDS
Stailess steel M8 nut. To set at M8 screws.

STAINLESS STEEL M8 WASHER

TDS
tds stainless steel m8 washer: Flat tds washer made of stainless steel for M8 fasteners used in backplates, rings and single tank adapters.

TRIM POCKET 2 KG (Unit)

DTD
€12.50 -20% €10.00
Small pocket for attachment to the strap exactly where you need it. It can carry one piece of weight block (dimensions 8x10x3 cm, 1,5-2 kg). Price is for 1 piece.
  • -20%

PLASTIC ADAPTER FOR TWIN (Unit)

TDS
Plastic piece to join two cylinders and asembly a twin with straps (straps not included). Sold unit.
Outlet
VIEW OUTLET

NRC PICK O2 OXYGEN ANALIZER

NRC
€240.00 -20% €192.00
Portable oxygen analyzer small sized, to measure the oxygen concentration. Measurement Range: 0-99 vol% O2 Resolution: 1 Vol%. Measuring Time: 1 Sec
  • -20%

TEK OX OXYGEN MONITORING

VANDAGRAPH
€350.00 -20% €280.00
Oxygen analyzer for use with one hand, and designed specifically for the heavy conditions on the marine environment. Waterproof .Large digits
  • -20%

QUICK-LINK S.S.

DTD
€3.50 -10% €3.15
Quick-Link stainless-steel, dimensions 36 x 17 mm, thickness 3,5 mm, opening max 5 mm.
  • -10%

JET FIN STRAP BLACK (2 Unt)

TDS

Replacement strip part for rubber fins models like Jet Fin model in black color.2 Units included.

NITROX TANK DECAL

TDS

TDS Nitrox Scuba Diving Tank Decal: Tds nitrox identification sticker to put on bottles Nitrox tanks and make a perfect identification and distinction from other bottles. Dimensions 60 cm x 15 cm

OXYGEN 300 BAR CONECTION W 30x2 (Ref 1134)

TECNOMAR
€100.00 -10% €90.00
Oxygen cylinder connection 300 B (W 30x2). With coupling to DIN 200/300 allows oxygen transfer oxygen cylinders with 300 bar DIN connections transfer device 200 or 300Oxygen cylinder connection 300 B (W 30x2). With coupling to DIN 200/300 allows oxygen transfer oxygen cylinders with 300 bar DIN connections transfer device 200 or 300
  • -10%

AIR/OXYGEN METALIC DECANTING HOSE DIGITAL...

TDS

TDS Oxygen & Air Metalic decanting hose with digital pressure gauge and valve for technical scuba diving: TDS Metalic decanting device for oxygen, with relieving pressure valve, 100 mm hose, digital pressure gauge and DIN 200/300 filling connection at both sides.

OXYGEN METALIC DECANTING HOSE W/PRESSURE GAUGE

TDS

Metalic decanting device for oxygen. Purge tap. With pressure gauge to control the amount of transferred gas. DIN 200/300 connections at both ends. Hose length 2 m approx.

METAL PRESSURE GAUGE 400 B

TDS

Pressure gauge in high quality metal housing and highly resistant mineral glass.Metalic and mineral glass finish.Scale up to 400 bar

PY63 DIR PRESSURE GAUGE 350 B METAL

TDS

The TDS PY63 press gauge is specially designed for stage tanks; its main characteristic is that it has an expanded diameter of 63 mm (unlike standard gauges that have average 52 mm). The scale is enhanced by this larger diameter and also has the novelty that the mark of 100 bars is in the vertical, which helps in low visibility conditions and the backlit display, the needle is perfectly distinguishable.

TITANIUM LINE CUTTER

TDS

Line cutter made of the best Beta Titanium alloy, with an abrasion resistance 5-6 times higher than other titanium alloys. Side aperture for cutting thick ropes or cords more easily.

HYDROS PRO MINI D RING SET

SCUBAPRO

This innovative Mini D-Ring Plate is ideal for attaching marker buoys and dive lights to your HYDROS PRO, plus it streamlines hose routing.