Valve with M25 thread and toroidal sealing (not EN144) DIN output with a working pressure of 300 b. Black plastic knob. The valves are shipped with seals and lubricants compatible for oxygen.

Full set of twin cylinders, DIR configured according to standards and includes the following items:12 liters tanks in long format, working pressure 232 bar, thread M 25x2 tap EN144 and concave bottom, Twin cylinders valve with manilfold and isolation valve, Stainless steel rings 171 mm in diameter

5.7 liters (40 cubic feet) tank made of aluminum alloy 6061-T6. CE approval. Flat bottom. Dimensions: Diameter - 133.4 mm; Height - 645 mm. Weight: 7.3 kg

2 litre Steel Oxygen Cylinder: WP 232 Bar, M25 x 2, c/w Oxygen Sticker. Rebreather Oxygen Cylinder Valve: oxygen clean, DIN 5/8" BSP outlet, green hand wheel and green bump cap

tds flat overpressure dump valve: tds Pressure relief - dump valve for wings and BCDs. The main feature is his very low profile, making the valve almost not protrude from the profile of the wing or jacket, favoring hydrodynamics and protecting it from blows.

Without isolation valve manifold for mounting twins. Different measures depending on thecylinders of the set: 171 mm for 10/12 liters long twins, 203 mm for 12/15 liters twins

tds inflator knee joint joint: tds Replacement inflator knee joint (elbow) to connect the inflation trachea hose with the wing bladder.Made of high strength plastic, it has reinforcing ribs to better resist knocks and traction.

Tank strap that includes a heavy stainless steel buckle. It can be used with single tank adapters or in a conventional BCD.

tds elastic cord bungee 6 mm by meters:Elastic cord - bungee type 6 mm thick for many uses both in technical diving, as recreational: 2nd stage hang neck, fastening computers, tanks, sidemount ... etc. Color Black. Sold by meters

Red aluminium whistle for acoustic signal at surface. With keychain ring.

Circular style wing for diving with a single tank. Comes out from time proven double layer model CUB. Use for single tank 12 - 18 l. Part of the wing are also 2 pieces of rubber pins in the middle area of wing which allow to attach the single bottle WITHOUT the need to use single tank adapter.

Lightweight model of RING wing for diving with single bottle. The same double-shell construction but the cover is made of lighter material Cordura 1000. Also the bottle strap buckles and the inflator end-piece are made from lighter material - high quality techno-polymer. Can be used with single bottle 12 l.

Circular style wing for diving with a single tank. Comes out from time proven double layer model CUB. Use for single tank 12 l. Part of the wing are also 2 pieces of rubber pins in the middle area of wing which allow to attach the single bottle WITHOUT the need to use single tank adapter.

Circular style wing for diving with a single tank. Comes out from time proven double layer model CUB. Use for single tank 12 - 18 l. Part of the wing are also 2 pieces of rubber pins in the middle area of wing which allow to attach the single bottle WITHOUT the need to use single tank adapter.

Circular style wing for diving with a single tank. Comes out from time proven double layer model CUB. Use for single tank 12 l. Part of the wing are also 2 pieces of rubber pins in the middle area of wing which allow to attach the single bottle WITHOUT the need to use single tank adapter.

Circular style wing for diving with doubles. STREAM RING 20 was designed for diving with double tanks from 2x7-2x12 and stage. Due to the small profile, along with sufficient lift, this wing is especially suitable for recreational and also tec diving.

The DTD Stream 20 CCR wing is especilly designed for diving with CCR rebreathers.

171 mm to use with doubles 10 - 12 long litres. 204 mm to use with doubles 12 - 15 litres

The AP Diving surface marker buoys can be inflated from a secondary air source, at any time during the dive to signal the end of it and mark the starting point .Also can be used as decompression globe.

Mask designed for technical diving, which meets the characteristics that technical divers demanding. Frameless low profile design, with a unique glass which give a broad overview and peripheral vision; reduced frameless design framework makes it very low profile for easy transport in suit pockets and harnesses

The Inspiration EVO is compact, light and easy to dive with. It features a 2kg scrubber and 2 litre cylinders. All AP rebreathers, including the EVO, can be dived to technical depths with the appropriate planning for diluent gas mix and off-board bailout. The Inspiration EVO is ideally suited to the travelling diving or underwater photographer who prefers a more streamlined ccr. The EVO is also ideal for the smaller framed diver

TDS wet notes with 40 waterproof pages and cordura cover with small pockets. It includes graphite pencil. It allows you to write in and out of the water. It has a loose table marked with a box for run time and to place it in an outside pocket with transparent window, so you can check the recorded times, without opening the book completely.