CARCASA PARA OLYMPUS TG-6
FTWFHTG6

CARCASA PARA OLYMPUS TG-6

€684.00
0%

FTWFHTG6

CARCASA PARA OLYMPUS TG-6

Consult with an expert
€684.00
Temporarily unavailable
Delivery:
Producto fuera de stock. Consultar en los próximos: días de entrega

Data sheet

ALUMINIUM
100 M
WITH ALARM
WITH SECURITY BLOCK
TOTAL
SYSTEM INCLUDED
OPTICS

Specific References

100 meter submersible aluminum housing, compatible with Olympus TG5 and TG6.

With this case you can use all the functions of your Olympus TG5 / TG6.

Now with the new built-in automatic vacuum system.

With the press of a button you will be able to activate the new emptying system with digital information capable of informing you visually when the tightness is suitable for diving and that at the same time will inform you if the housing does not have this tightness with which the risk of flood is eliminated.

How to use the new emptying system:

Place the AAA batteries in their place inside the housing, remove the cap from the front port so that the housing can expel the indoor air and wait for the pump to stop and the light system stays blinking green.

Now you can close the front port plug and go diving with complete peace of mind.

Once you have emptied the housing, before you can open it you must remove the front cap and press the internal valve so that the air returns to the housing and so you can open it without problem.

The emptying system is turned off by long press of 3s.

Characteristics:

- New automatic emptying system with digital information

- Compatible with Olympus TG5 and TG6

- 52mm front

- Made of anodized aluminum

- Delivered with fiber cable

- Submersible up to 100m

- Double side flash output

- All camera functions can be used

- Trigger over dimensioning for easy use

- External measurements: 161.4 x 74.2 x 121.2 mm

- Ground weight: 685gr

- Triple 1/4 "thread compatible with all plates

- Works with two AAA batteries

Latest posts

View Blog