List of products by brand TDS

Modular side Left-type valves cap, to close the side exit to exit manifold or modular plug. Matt black finish of the military series.

Lift bag open type manufactured in high strength PVC with high frequency heat sealed seams. Slings are braided nylon and polypropylene are attached to the lifting surface via semicircular stainless steel rings by four points.

Low pressure gauge with connection to bc hose. It is used to check the outlet pressure of the first stage regulators. Must in any technical service.

LP Low pressure flex hose with racord to attach to on low pressure inflator BPI, 100 cm length.

LP Low pressure hose with racord to attach to on low pressure inflator BPI, 100 cm length.

LP Low pressure hose 20 cm length with pipe clip to attach to a low pressure inflator . Especially for sidemount.

LP Low pressure hose with racord to attach to on low pressure inflator BPI, 55 cm length.

LP low pressure regulator hose 100 cm length. Connecting the first stage to the second stage regulator.

LP low pressure regulator hose 150 cm length. Connecting the first stage to the second stage regulator.

LP low pressure regulator hose 210 cm length. Connecting the 1st stage to the second. Ideal for twin cylinders type DIR configurations.

LP Low pressure hose for regulator 60 cm length. Connecting the first stage to the second stage regulator.

Low pressure hose for regulator with braided outer coating. Color black. Length 100 cm.

Low pressure hose for regulator with braid outer coating. Color black. Length 210 cm.

Valve with M25 thread and toroidal sealing bottles (not EN144), exit DIN / INT convertible by core with a 232 atm working pressure. Black plastic knob on the left and output for connection to modular manifold.

Valve with M25 thread and toroidal sealing (not EN144) DIN output with a working pressure of 300 b. Black plastic knob. The valves are shipped with seals and lubricants compatible for oxygen.

M 25x2, EN144-1 standar valve two autlets in "T" foarm. Thanks to T disposión, two mounting of twoseparate stages is much easier, and allows better access to manipulate the knobs during the dive

M 25x2 cylinder therad and EN144-1. Standard Yoke Outlet with a Spin-Out Threaded DIN Adapter.

M 25x2 cylinder therad and EN144-1. Standard Yoke Outlet with a Spin-Out Threaded DIN Adapter. Matte black finish, designed for special forces that avoids glare and camouflages the diver's silhouette.

Valve with M25x2 thread EN144 bottle, M26x2 output with a 232 atm working pressure. Elongated green plastic knob. Especially for stage cylinders. The valves are shipped with seals and lubricants compatible for oxygen.

TDS Stainless steel M8 screw and 40mm long. To attach the single tank adapter to the diving back plate, and for many other uses.