Cookie preferences
LP REGULATOR HOSE 60 CM
TDS
Not available in this country.LP Low pressure hose for regulator 60 cm length. Connecting the first stage to the second stage regulator.
Menu
LP INFLATOR HOSE 20 CM (Sidemount)
TDS
LP Low pressure hose 20 cm length with pipe clip to attach to a low pressure inflator . Especially for sidemount.
LP REGULATOR HOSE FLEX BLACK 100 CM
TDS
Low pressure hose for regulator with braided outer coating. Color black. Length 100 cm.
OXYGEN INFLATOR SERVCE KIT
APD
€7.90
Oxygen Inflator Service Kit - for Over-the-Shoulder Counterlung Inflators. All AP Service Kits are oxygen compatible, that is, the materials used are compatible with being oxygen cleaned
2 X10/12 TWIN VALVE W/MANIFOLD & ISOLATOR
TDS
Twins valve for 10 or 12 liters in long form cylinders (171 mm diameter). With metric M25x2 EN144 thread . Manifold connection with isolation valve.
S80/S63 ALUMINIUM TANK BOTTOM
TDS
Tank bottom for aluminum tanks in S80 and S63 format. Protect the bottom of the bottles from bumps and scratches. Color: Black
MALE M26 TO DIN 200 G5/8 FEMALE CONVERTER
APD
€40.00
-20%
€32.00
For gas-filling when travelling in Europe and/or adapting an M26x2 cylinder valve to accept a 5/8" BSP first stage, compressor connector or O2 whip
- -20%
90° LP SWIVEL
BTS
€37.00
90 ° swivel elbow male thread UNF 3/8 "(LP) to female UNF 3/8" (LP). It enables optimal routing hoses.
R22 VAN OXYGEN SENSOR FOR DIVESOFT
VANDAGRAPH
€115.00
-20%
€92.00
vandagraph r-22van oxygen sensor for divesoft: Vandagraph R-22VAN oxygen sensor, compatible with Oxyspy. NOTE: This sensor is not suitable for use with Rebreathers
- -20%
DECO BUOY 30 LB
APD
€80.00
The AP Diving surface marker buoys can be inflated from a secondary air source, at any time during the dive to signal the end of it and mark the starting point .Also can be used as decompression globe.
STAINLESS STEEL BACKPLATE
TDS
Stainless Steel Back Plate from TDS.Compatible with all DTD accessories. Holes that let adjust in two different heights. Perforations to pass the single tank straps.
VIEW OUTLET
SINGLE TANK ADAPTER PIECE
TDS
Plate to fitting single tank to back plate. Stainless steel or aluminum models. It also can be used to mount twins with double tank straps (not included). Weights: Stainless steel 0.870 kg
STEEL BACKPLATE 6 MM 5 KG.
DTD
€290.00
-10%
€261.00
Stainless-steel backplate, thickness 6 mm, made of salt water resistant stainless-steel with edges bevelled on a NC cutter, manually polished for perfect flattening of sharp edges.
- -10%
WTX BACKPLATE STEEL
APEKS
€239.00
-20%
€191.20
The WTX and WTX-D Series is a selection of harnesses, buoyancy cells and accessories which offer unparalleled versatility due to the modular nature of the whole system. Each component can be configured into a highly technical rig for those trained to push the limits, or scaled down to make a travel friendly set up suitable for any diver.
- -20%
S.S. BACKPLATE
OMS
€125.00
Heavy duty and designed to work with single tanks or doubles. Our Stainless steel plates will be the last plate you every buy. We stopped at no expense on this plate. We have added multiple mounting holes, waist band holes and accessory holes to maximize comfort and flexibility. All edges have been rounded over and polished so you will never have to worry about wear from the plate.
ALUMINIUM BACKPLATE
TDS
tds aluminium back plate: Anodized Aluminum Back Plate from TDS. Holes that let you adjust in two different heights. Perforations to pass the single tank straps. Multiple holes for different accessories.
VIEW OUTLET
NON ISOLATION MANIFOLD (Various Sizes)
TDS
Without isolation valve manifold for mounting twins. Different measures depending on thecylinders of the set: 171 mm for 10/12 liters long twins, 203 mm for 12/15 liters twins
ARGON STRAPS FOR BP 250/280 (2 Unt)
DTD
€33.00
-10%
€29.70
For mounting a small argon bottle (6 cft / 1 liter / diam. 85 mm = 3,35 inches) directly on a backplate. Comes in pair (2 pieces).
- -10%
2nd STAGE 90° REVOLVING CONNECTOR
TDS
Fixed elbow to place between the second stage and the hose, which allows routing to 90 degrees. Made of chrome plated brass. Thread 9/16 "Male to 9/16" female.
SPOOL REEL BLACK 45 M
TDS
Reel spool type made of high strength plastic, redesigned side holes thats reduces weight and facilitates the carabiner hooking to retain the rope. Includes 45 m high visibility orange wire. Stainless Steel double bolt snap trigger included.
TWIN RIGHT VALVE M25 232 BAR WITHOUT CAP
TDS
Valve with M25 thread and toroidal sealing bottles (not EN144), exit DIN / INT convertible by core with a 232 atm working pressure. Black plastic knob on the right and output for connection to modular manifold.