CCR M25 OXYGEN VALVE 1 EXIT
CCR M25 DILUENT VALVE 1 EXIT
KNOB W/INDICATOR
Knob for diving valve with opening indicator. When the tank is closed a red ring around appears, and when tank is open the ring is green.
GREEN KNOB
Valve knob made of green rubber, with a length greater than the usual knobs for easy opening and closing. They are compatible with most of the axes of the valves. Very used to distinguish decompression and rebreathers oxygen tanks.
2 X10/12 TWIN VALVE W/MANIFOLD & ISOLATOR
Twins valve for 10 or 12 liters in long form cylinders (171 mm diameter). With metric M25x2 EN144 thread . Manifold connection with isolation valve.
90° LP SWIVEL
MALE DIN 200 G5/8 TO FEMALE M26 CONVERTER
MOUTHPIECE MAJOR SERVICE KIT
BUNGEE MOUNT FOR VYPER/GEKKO/VYTEC
- -10%
CCR FLOW STOP
SCRUBBER CANISTER O-RINGS SET
R22 D APD14 SENSOR COAXIAL FITTING FOR EVO/INSPI V
Coaxial swivel connection. The APD14 has an excellent performance record and has the lowest return rate of any oxygen cell we have sold in the past 18 years.
FS101 1st STAGE SERVICE KIT
FS100 1st STAGE SERVICE KIT
INSPIRATION XPD REBREATHER
INSPIRATION EVP REBREATHER
INSPIRATION EVO REBREATHER
The Inspiration EVO is compact, light and easy to dive with. It features a 2kg scrubber and 2 litre cylinders. All AP rebreathers, including the EVO, can be dived to technical depths with the appropriate planning for diluent gas mix and off-board bailout. The Inspiration EVO is ideally suited to the travelling diving or underwater photographer who prefers a more streamlined ccr. The EVO is also ideal for the smaller framed diver
WRIST WET NOTE
Underwater slate, with a special shape that fits to the wrist or forearm and allows place with other instruments without any disturb.
PROBLENDER 1000 TRIMIX BLENDER
The solution to mix Nitrox, Trimix, Triox and Héliox while emptying B50. Allows to mix any Nitrox, Trimix, Triox and Héliox having a maximal rate of 40% of O2. The technic consists in making Nitrox, Trimix, Triox or Héliox before compressing it by the mean of the compressor. That is why we must not exceed 40% of O2.
PROBLENDER 1000 NITROX BLENDER
The best solution to blend Nitrox while emptying B50 safety. Allows to blend any Nitrox up to 40 % of O2. The technique consists in mixing the Nitrox before passing it through the compressor. It is for this reason that we can not exceed 40 % of O2.