tds dump valve closure cap: Closure cap for closing / annuling quick dump valves on wings or BCs.Compatible with most wing and BC valves on the market.

Fixed elbow to place between the second stage and the hose, which allows routing to 90 degrees. Made of chrome plated brass. Thread 9/16 "Male to 9/16" female.

Modular side left-type valves cap, to close the side exit to exit manifold or modular plug.

Modular side Right-type valves cap, to close the side exit to exit manifold or modular plug.

Valve with M25x2 thread EN144 bottle, M26x2 output with a 232 atm working pressure. Elongated green plastic knob. Especially for stage cylinders. The valves are shipped with seals and lubricants compatible for oxygen.

Valve with M25 thread and toroidal sealing bottles (not EN144), exit DIN / INT convertible by core with a 232 atm working pressure. Black plastic knob on the right and output for connection to modular manifold.

Valve with M25 thread and toroidal sealing bottles (not EN144), exit DIN / INT convertible by core with a 232 atm working pressure. Black plastic knob on the left and output for connection to modular manifold.

Valve knob made of green rubber, with a length greater than the usual knobs for easy opening and closing. They are compatible with most of the axes of the valves. Very used to distinguish decompression and rebreathers oxygen tanks.

Twins valve for 10 or 12 liters in long form cylinders (171 mm diameter). With metric M25x2 EN144 thread . Manifold connection with isolation valve.

Valve with M25 thread and toroidal sealing (not EN144) DIN output with a working pressure of 300 b. Black plastic knob. The valves are shipped with seals and lubricants compatible for oxygen.

Full set of twin cylinders, DIR configured according to standards and includes the following items:12 liters tanks in long format, working pressure 232 bar, thread M 25x2 tap EN144 and concave bottom, Twin cylinders valve with manilfold and isolation valve, Stainless steel rings 171 mm in diameter

5.7 liters (40 cubic feet) tank made of aluminum alloy 6061-T6. CE approval. Flat bottom. Dimensions: Diameter - 133.4 mm; Height - 645 mm. Weight: 7.3 kg

2 litre Steel Oxygen Cylinder: WP 232 Bar, M25 x 2, c/w Oxygen Sticker. Rebreather Oxygen Cylinder Valve: oxygen clean, DIN 5/8" BSP outlet, green hand wheel and green bump cap

Faber 12 liters container in long format and white color. CE approved and compliance with EN250 standard. The thread is M25x2 with standard EN144 rule. Work pressure of 232 bar. Not include valve.

Oxygen sensor for Vandagraph VN202 analyzers and TEK-OX models. It is also compatible with. MSA MiniOX, Dive Rite VTI, AD300 and Teledyne MD300. Jack type connection.

Samsung 18650 Lithium Battery for TDS Maru / Dzenot diving led lights: Samsung Ion-Lithium battery 18650 type, compatible with TDS Maru and DZenot lights. It is also valid for other light models that uses this type of battery. Capacity: 2900 mAh, Voltage: 3.7 V

TDS Gull Z Tek Scuab Diving Regulator Reversible with bag: Gull successful stages of TDS now full set of first and new reversible second stage Gull Z with hose and carriyin bag.

Latex Wrist Seal with bottleneck shape and narrow sleeve circumference (smaller diameter at the suit side of the seal). Available in four sizes: X-small, Small, Medium and Large.Latex Seals are the most commonly used seals in the market today. 

Silicone Wrist Seals are constructed from hypoallergenicic silicone that have 40 % better stretch and offer enhanced comfort compared to latex seals. Divers with latex allergies can dive carefree, knowing that the seals are non-allergenic.

sitech släggö flex ring latex seals: SLÄGGÖ Flex Ring is a flexible Modular Quick Change Solution. The design provides superb comfort and is able to be mounted in a great range of garments. The system has a circular shape, so there is no need of indexation/orientation during installation.

sitech släggö flex ring silicone seals: SLÄGGÖ Flex Ring is a flexible Modular Quick Change Solution. The design provides superb comfort and is able to be mounted in a great range of garments. The system has a circular shape, so there is no need of indexation/orientation during installation.