R22 VAN OXYGEN SENSOR FOR DIVESOFT

VANDAGRAPH
€115.00 -20% €92.00

vandagraph r-22van oxygen sensor for divesoft: Vandagraph R-22VAN oxygen sensor, compatible with Oxyspy. NOTE: This sensor is not suitable for use with Rebreathers

  • -20%

DECO BUOY 30 LB

APD
€80.00

The AP Diving surface marker buoys can be inflated from a secondary air source, at any time during the dive to signal the end of it and mark the starting point .Also can be used as decompression globe.

STAINLESS STEEL BACKPLATE

TDS

Not available in this country.

Stainless Steel Back Plate from TDS.Compatible with all DTD accessories. Holes that let adjust in two different heights. Perforations to pass the single tank straps.

Outlet
VIEW OUTLET

SINGLE TANK ADAPTER PIECE

TDS

Not available in this country.

Plate to fitting single tank to back plate. Stainless steel or aluminum models. It also can be used to mount twins with double tank straps (not included). Weights: Stainless steel 0.870 kg

STEEL BACKPLATE 6 MM 5 KG.

DTD
€290.00 -10% €261.00

Stainless-steel backplate, thickness 6 mm, made of salt water resistant stainless-steel with edges bevelled on a NC cutter, manually polished for perfect flattening of sharp edges.

  • -10%

WTX BACKPLATE STEEL

APEKS
€239.00 -20% €191.20

The WTX and WTX-D Series is a selection of harnesses, buoyancy cells and accessories which offer unparalleled versatility due to the modular nature of the whole system. Each component can be configured into a highly technical rig for those trained to push the limits, or scaled down to make a travel friendly set up suitable for any diver.

  • -20%

S.S. BACKPLATE

OMS
€125.00
Heavy duty and designed to work with single tanks or doubles. Our Stainless steel plates will be the last plate you every buy. We stopped at no expense on this plate. We have added multiple mounting holes, waist band holes and accessory holes to maximize comfort and flexibility. All edges have been rounded over and polished so you will never have to worry about wear from the plate.

ALUMINIUM BACKPLATE

TDS

Not available in this country.

tds aluminium back plate: Anodized Aluminum Back Plate from TDS. Holes that let you adjust in two different heights. Perforations to pass the single tank straps. Multiple holes for different accessories.

Outlet
VIEW OUTLET

NON ISOLATION MANIFOLD (Various Sizes)

TDS

Not available in this country.

Without isolation valve manifold for mounting twins. Different measures depending on thecylinders of the set: 171 mm for 10/12 liters long twins, 203 mm for 12/15 liters twins

BTS VALVE FOR TWIN

BTS
€56.00 -10% €50.40
Outlet
VIEW OUTLET
Outlet
VIEW OUTLET
  • -10%

ARGON STRAPS FOR BP 250/280 (2 Unt)

DTD
€33.00 -10% €29.70
For mounting a small argon bottle (6 cft / 1 liter / diam. 85 mm = 3,35 inches) directly on a backplate. Comes in pair (2 pieces).
  • -10%

S80/S63 ALUMINIUM TANK BOTTOM

TDS

Not available in this country.

Tank bottom for aluminum tanks in S80 and S63 format. Protect the bottom of the bottles from bumps and scratches. Color: Black

2nd STAGE 90° REVOLVING CONNECTOR

TDS

Not available in this country.

Fixed elbow to place between the second stage and the hose, which allows routing to 90 degrees. Made of chrome plated brass. Thread 9/16 "Male to 9/16" female.

ARGON STRAPS FOR BP 330/360

DTD
€40.00 -20% €32.00
dtd argon straps for back plate 330/360: For mounting an argon bottle with circumference 330 - 360 mm (diam. 105 - 115 mm = 4,13 - 4,51 inch) directly on a backplate. Comes in a pair (2 pieces).
  • -20%

MALE M26 TO DIN 200 G5/8 FEMALE CONVERTER

APD
€40.00 -20% €32.00
For gas-filling when travelling in Europe and/or adapting an M26x2 cylinder valve to accept a 5/8" BSP first stage, compressor connector or O2 whip
  • -20%

RIGHT TWIN VALVE CAP

BTS
€10.00
Blind plug for Din valve right expandable. Up to 300 bar.

LEFT TWIN VALVE CAP

BTS
€10.00

Blind plug for Din valve left expandable. Up to 300 bar.

RIGHT VALVE DIN 200 1 EXIT

BTS
€48.00
Outlet
VIEW OUTLET
Din valve right expandable. Up to 220 bar. To use with twins and sidemount systems.
Outlet
VIEW OUTLET

LEFT TWIN VALVE CAP

TDS

Not available in this country.

Modular side left-type valves cap, to close the side exit to exit manifold or modular plug.

RIGHT TWIN VALVE CAP

TDS

Not available in this country.

Modular side Right-type valves cap, to close the side exit to exit manifold or modular plug.

M26 OXYGEN VALVE 232 B

TDS

Not available in this country.

Valve with M25x2 thread EN144 bottle, M26x2 output with a 232 atm working pressure. Elongated green plastic knob. Especially for stage cylinders. The valves are shipped with seals and lubricants compatible for oxygen.

TWIN RIGHT VALVE M25 232 BAR WITHOUT CAP

TDS

Not available in this country.

Valve with M25 thread and toroidal sealing bottles (not EN144), exit DIN / INT convertible by core with a 232 atm working pressure. Black plastic knob on the right and output for connection to modular manifold.

M25 TWIN RIGHT VALVE WO/ CAP 232 B

TDS

Not available in this country.

Valve with M25 thread and toroidal sealing bottles (not EN144), exit DIN / INT convertible by core with a 232 atm working pressure. Black plastic knob on the left and output for connection to modular manifold.