DIN VALVE TAPE W/PURGE
Chrome Brass protective cap with integrated purge valves DIN 300. Protects the threads and prevents leakage of gas bottle an unintentional openings, such as when transported in the trunk of the car.
Chrome Brass protective cap with integrated purge valves DIN 300. Protects the threads and prevents leakage of gas bottle an unintentional openings, such as when transported in the trunk of the car.
The plastic Refill Port Cap screws onto the Check Valve to protect the Spare Air when diving or storing. The Cap can be quickly unscrewed for filling your Spare Air unit by compressor or from a filled SCUBA tank.
Replacement Refill Port Assembly includes the Check Valve and all internal components (stem and spring). Black Cap sold separately.
Teflon closure spare part for EN 144-1 diving valve. Total legth: 15 mm
Teflon closure spare part for EN 144-1 diving valve. Total legth: 15 mm
Complete rigging set for cylinders S40 . Two stainless steel trigger type carabiners. Black nylon rope. Rigid hose type tube to facilitate the passage of the fingers. Stainless steel clamp covered with nylon webbing to avoid abrasions. Two wide elastic bands to fold the hose and hold the second stage of the regulator.
Plate for mounting a single bottle on back plate, in polished aluminum. Includes set of two bottle straps with stainless steel buckle. Also includes a complete set of screws with spherical head, square body to avoid turning when tightening, washers and wing nuts. Approximate weight of the set 1 kg
Complete harness for mounting a side tank for stage, bailout or side mount. It is valid for aluminum cylinders used in technical diving of the S80 type. The set comes pre-assembled and requires minimal installation by the user, thus customizing the position of the tank.
Complete harness for mounting a side tank for stage, bailout or side mount. It is valid for aluminum cylinders used in technical diving of the S40 type. The set comes pre-assembled and requires minimal installation by the user, thus customizing the position of the tank.
The Apeks HP twin adaptor allows you to use both an SPG and a transmitter from a single High-Pressure port. This is especially useful for 1st stages that only have a single HP port. The HP twin adaptor utilises a standard 7/16” thread and is suitable for use on all manufacturers 1st stages.
Modular side Right-type valves cap, to close the side exit to exit manifold or modular plug. Matt black finish of the military series.
Manifold with isolation valve for twins mounting. 171 mm for 10/12 long twins. Matt black finish of the military series.
Modular side Left-type valves cap, to close the side exit to exit manifold or modular plug. Matt black finish of the military series.
Manifold with isolation valve for twins mounting. Different measures depending on the cylinders of the set: 171 mm, 180 mm (aluminium) and 203 mm