STANDARD SPEARGUN BAND (SPEARGUN 85-90)

CRESSI
€16.00 -10% €14.40

Exceptional Cressi-sub rubbers, studied carefully to use them in all kinds of fishing and spear guns, that are perfect for hole fishing of medium pieces with 6mm and 6.5mm rods. Its composition, level of hardness and thickness are the result of loads of proofs made to different models and the final product answers the requirements of the medium / medium-high level fisher.

  • -10%

G20 CIRCULAR SPEARGUN BAND (95-100 SPEARGUN)

CRESSI
€18.00 -10% €16.20

Presentation in quick rubber G20 model to use in spear guns with open headboard. Its fascinating power is due to a combination of big diameter 19.5mm with low hardness and a lot of progressivity on the handing. Its composition, diameter and reduced tube diameter provide it a great resistance to pressure that also make them perfect for deep fishing.

  • -10%

G-20 PLUS SPEARGUN BAND (105-110 SPEARGUN )

CRESSI
€25.00 -10% €22.50

Exceptional Cressi-sub rubbers made and mounted 100% in Spain. They’ve been studied precisely to use them in high level fishing and in competitions. Its composition, level of hardness and thickness are the result of loads of proofs made to different models and the final product answers the requirements of high level fishers with any kind of rod.

  • -10%

G-20 PLUS SPEARGUN BAND (95-100 SPEARGUN )

CRESSI
€25.00 -10% €22.50

Exceptional Cressi-sub rubbers made and mounted 100% in Spain. They’ve been studied precisely to use them in high level fishing and in competitions. Its composition, level of hardness and thickness are the result of loads of proofs made to different models and the final product answers the requirements of high level fishers with any kind of rod.

  • -10%

G-20 PLUS SPEARGUN BAND (85-90 SPEARGUN )

CRESSI
€25.00 -10% €22.50

Exceptional Cressi-sub rubbers made and mounted 100% in Spain. They’ve been studied precisely to use them in high level fishing and in competitions. Its composition, level of hardness and thickness are the result of loads of proofs made to different models and the final product answers the requirements of high level fishers with any kind of rod.

  • -10%

G-20 PLUS SPEARGUN BAND (82-84 SPEARGUN )

CRESSI
€25.00 -10% €22.50

Exceptional Cressi-sub rubbers made and mounted 100% in Spain. They’ve been studied precisely to use them in high level fishing and in competitions. Its composition, level of hardness and thickness are the result of loads of proofs made to different models and the final product answers the requirements of high level fishers with any kind of rod.

  • -10%

G-20 PLUS SPEARGUN BAND (75 SPEARGUN )

CRESSI
€25.00 -10% €22.50

Exceptional Cressi-sub rubbers made and mounted 100% in Spain. They’ve been studied precisely to use them in high level fishing and in competitions. Its composition, level of hardness and thickness are the result of loads of proofs made to different models and the final product answers the requirements of high level fishers with any kind of rod.

  • -10%

STANDARD SPEARGUN BAND (SPEARGUN 105-110)

CRESSI
€18.00 -10% €16.20

Exceptional Cressi-sub rubbers, studied carefully to use them in all kinds of fishing and spear guns, that are perfect for hole fishing of medium pieces with 6mm and 6.5mm rods. Its composition, level of hardness and thickness are the result of loads of proofs made to different models and the final product answers the requirements of the medium / medium-high level fisher.

  • -10%

STANDARD SPEARGUN BAND (SPEARGUN 95-100)

CRESSI
€17.00 -10% €15.30

Exceptional Cressi-sub rubbers, studied carefully to use them in all kinds of fishing and spear guns, that are perfect for hole fishing of medium pieces with 6mm and 6.5mm rods. Its composition, level of hardness and thickness are the result of loads of proofs made to different models and the final product answers the requirements of the medium / medium-high level fisher.

  • -10%

STANDARD SPEARGUN BAND (SPEARGUN 82-84)

CRESSI
€15.00 -10% €13.50

Exceptional Cressi-sub rubbers, studied carefully to use them in all kinds of fishing and spear guns, that are perfect for hole fishing of medium pieces with 6mm and 6.5mm rods. Its composition, level of hardness and thickness are the result of loads of proofs made to different models and the final product answers the requirements of the medium / medium-high level fisher.

  • -10%

TEMPLA SHAFT 6.50 MM 105 CM

CRESSI
€24.00 -10% €21.60

Cressi Templa Shaft 6.50 mm: Cressi Templa rod for speargun made with finishing parameters and very restricted dimensions to obtain a maximum adaptation to all type of mechanisms. Mechanism made of stainless steel tools “hard metal” to avoid the pollution of the rod material and possible rust spots of the machined zones

  • -10%

STANDARD SPEARGUN BAND (SPEARGUN 75)

CRESSI
€14.00 -10% €12.60

Exceptional Cressi-sub rubbers, studied carefully to use them in all kinds of fishing and spear guns, that are perfect for hole fishing of medium pieces with 6mm and 6.5mm rods. Its composition, level of hardness and thickness are the result of loads of proofs made to different models and the final product answers the requirements of the medium / medium-high level fisher.

  • -10%

STANDARD SPEARGUN BAND (SPEARGUN 55-60)

CRESSI
€14.00 -10% €12.60

Exceptional Cressi-sub rubbers, studied carefully to use them in all kinds of fishing and spear guns, that are perfect for hole fishing of medium pieces with 6mm and 6.5mm rods. Its composition, level of hardness and thickness are the result of loads of proofs made to different models and the final product answers the requirements of the medium / medium-high level fisher.

  • -10%

TEMPLA SHAFT 6.50 MM 140 CM

CRESSI
€31.00 -10% €27.90

Cressi Templa Shaft 6.50 mm: Cressi Templa rod for speargun made with finishing parameters and very restricted dimensions to obtain a maximum adaptation to all type of mechanisms. Mechanism made of stainless steel tools “hard metal” to avoid the pollution of the rod material and possible rust spots of the machined zones

  • -10%

TEMPLA SHAFT 6.50 MM 135 CM

CRESSI
€30.00 -10% €27.00

Cressi Templa Shaft 6.50 mm: Cressi Templa rod for speargun made with finishing parameters and very restricted dimensions to obtain a maximum adaptation to all type of mechanisms. Mechanism made of stainless steel tools “hard metal” to avoid the pollution of the rod material and possible rust spots of the machined zones

  • -10%

TEMPLA SHAFT 6.50 MM 130 CM

CRESSI
€29.00 -10% €26.10

Cressi Templa Shaft 6.50 mm: Cressi Templa rod for speargun made with finishing parameters and very restricted dimensions to obtain a maximum adaptation to all type of mechanisms. Mechanism made of stainless steel tools “hard metal” to avoid the pollution of the rod material and possible rust spots of the machined zones

  • -10%

TEMPLA SHAFT 6.50 MM 125 CM

CRESSI
€28.00 -10% €25.20

Cressi Templa Shaft 6.50 mm: Cressi Templa rod for speargun made with finishing parameters and very restricted dimensions to obtain a maximum adaptation to all type of mechanisms. Mechanism made of stainless steel tools “hard metal” to avoid the pollution of the rod material and possible rust spots of the machined zones

  • -10%

TEMPLA SHAFT 6.50 MM 120 CM

CRESSI
€27.00 -10% €24.30

Cressi Templa Shaft 6.50 mm: Cressi Templa rod for speargun made with finishing parameters and very restricted dimensions to obtain a maximum adaptation to all type of mechanisms. Mechanism made of stainless steel tools “hard metal” to avoid the pollution of the rod material and possible rust spots of the machined zones

  • -10%

TEMPLA SHAFT 6.50 MM 115 CM

CRESSI
€26.00 -10% €23.40

Cressi Templa Shaft 6.50 mm: Cressi Templa rod for speargun made with finishing parameters and very restricted dimensions to obtain a maximum adaptation to all type of mechanisms. Mechanism made of stainless steel tools “hard metal” to avoid the pollution of the rod material and possible rust spots of the machined zones

  • -10%

TEMPLA SHAFT 6.50 MM 110 CM

CRESSI
€25.00 -10% €22.50

Cressi Templa Shaft 6.50 mm: Cressi Templa rod for speargun made with finishing parameters and very restricted dimensions to obtain a maximum adaptation to all type of mechanisms. Mechanism made of stainless steel tools “hard metal” to avoid the pollution of the rod material and possible rust spots of the machined zones

  • -10%

MASK STRAP BLACK SILICONE 20 MM

TDS

TDS Scuba Diving Mask Strap Black silicone 16 mm: Mask strap in black silicone. Valid for many market mask models.20 mm wide.

X-WING SHORT FIN PINK

MARES

Mares X-Wing Short Freediving Fin: X-Wing Short freediving fins are manufactured using a complex injection printing process. This process allows the incorporation of different thicknesses, such as carbon and fiberglass fins. It also makes it possible to manufacture soft and elastic blades at the right points.

G20 CIRCULAR SPEARGUN BAND (115-120 SPEARGUN)

CRESSI
€20.00 -10% €18.00

Presentation in quick rubber G20 model to use in spear guns with open headboard. Its fascinating power is due to a combination of big diameter 19.5mm with low hardness and a lot of progressivity on the handing. Its composition, diameter and reduced tube diameter provide it a great resistance to pressure that also make them perfect for deep fishing.

  • -10%

EOS 15 LRZ LIGHT 1580 LUMEN

MARES

Mares EOS 15 LRZ Scuba Diving Led Light 1580 Lumen: The new line of EOS LRZ flashlights represents an innovation in the flashlight landscape, with unique features on the market, at competitive prices. Apart from the option to adjust the light range according to the needs and conditions of the dive, the new EOS LRZ flashlights now feature a multifunction mechanical switch with battery charge indicator. Always knowing the battery charge level is extremely useful, especially during the dive!