Minimalist Cressi Dyneema Abellan howitzer for assembly of rubbers with strips and without screwed bushings. It has a tempered stainless steel clamp and a stainless steel sphere of 7 mm diameter, which allows the assembly even on thin rubbers without difficulties to introduce the howitzer in the rubber’s tube and avoiding an extremely forcing of the sphere to the rubber in the critical point of constriction with the rope.

Minimalist Cressi Dyneema Conic wishbone for assembly of rubbers with strips and without bushings. It’s recommended for all kinds of metro rubbers but especially for the ones of reduced diameter because of the peculiarities of its elegant design. Mechanized in one piece of AISI 316 steel.

Resistant, very light and very visible, the floating line winder is an essential accessory to adjust easily and quickly the amount of the floating line of the buoy that we need in each phase of the journey avoiding annoying and dangerous tangles.

A low acidity detergent (pH 5.5) polyvalent for cleaning the neoprene elements and for the placement of microporous suits avoiding skin irritations.

Cressi Deodorant Cleaner 1 l: Presentation in "Individual" format of this powerful concentrated enzymatic deodorant, designed to eliminate odors and 100% disinfect the neoprene elements of the dive gear. A single dose of 50ml is considered the quantity needed for a 100L water bucket.

Cressi Plasma Rods for spearfishing are realized with a few parameters of endings and really strict levels for a greater adjustment to all kinds of mechanisms. Mechanized made with useful stainless hard metal to avoid the pollution of the material of the rod and possible points of oxide of the mechanized zones.

Cressi Plasma Rods for spearfishing are realized with a few parameters of endings and really strict levels for a greater adjustment to all kinds of mechanisms. Mechanized made with useful stainless hard metal to avoid the pollution of the material of the rod and possible points of oxide of the mechanized zones.

Cressi Templa Shaft 6.50 mm: Cressi Templa rod for speargun made with finishing parameters and very restricted dimensions to obtain a maximum adaptation to all type of mechanisms. Mechanism made of stainless steel tools “hard metal” to avoid the pollution of the rod material and possible rust spots of the machined zones

Cressi Templa Shaft 6.50 mm: Cressi Templa rod for speargun made with finishing parameters and very restricted dimensions to obtain a maximum adaptation to all type of mechanisms. Mechanism made of stainless steel tools “hard metal” to avoid the pollution of the rod material and possible rust spots of the machined zones

Cressi Templa Shaft 6.50 mm: Cressi Templa rod for speargun made with finishing parameters and very restricted dimensions to obtain a maximum adaptation to all type of mechanisms. Mechanism made of stainless steel tools “hard metal” to avoid the pollution of the rod material and possible rust spots of the machined zones

Cressi Templa Shaft 6.50 mm: Cressi Templa rod for speargun made with finishing parameters and very restricted dimensions to obtain a maximum adaptation to all type of mechanisms. Mechanism made of stainless steel tools “hard metal” to avoid the pollution of the rod material and possible rust spots of the machined zones

Cressi Templa Shaft 6.50 mm: Cressi Templa rod for speargun made with finishing parameters and very restricted dimensions to obtain a maximum adaptation to all type of mechanisms. Mechanism made of stainless steel tools “hard metal” to avoid the pollution of the rod material and possible rust spots of the machined zones

Cressi Templa Shaft 6.50 mm: Cressi Templa rod for speargun made with finishing parameters and very restricted dimensions to obtain a maximum adaptation to all type of mechanisms. Mechanism made of stainless steel tools “hard metal” to avoid the pollution of the rod material and possible rust spots of the machined zones

Cressi Templa Shaft 6.50 mm: Cressi Templa rod for speargun made with finishing parameters and very restricted dimensions to obtain a maximum adaptation to all type of mechanisms. Mechanism made of stainless steel tools “hard metal” to avoid the pollution of the rod material and possible rust spots of the machined zones

Cressi Templa Shaft 6.50 mm: Cressi Templa rod for speargun made with finishing parameters and very restricted dimensions to obtain a maximum adaptation to all type of mechanisms. Mechanism made of stainless steel tools “hard metal” to avoid the pollution of the rod material and possible rust spots of the machined zones

Cressi Templa Shaft 6.50 mm: Cressi Templa rod for speargun made with finishing parameters and very restricted dimensions to obtain a maximum adaptation to all type of mechanisms. Mechanism made of stainless steel tools “hard metal” to avoid the pollution of the rod material and possible rust spots of the machined zones

Cressi Plasma Rods for spearfishing are realized with a few parameters of endings and really strict levels for a greater adjustment to all kinds of mechanisms. Mechanized made with useful stainless hard metal to avoid the pollution of the material of the rod and possible points of oxide of the mechanized zones.

Cressi Plasma Rods for spearfishing are realized with a few parameters of endings and really strict levels for a greater adjustment to all kinds of mechanisms. Mechanized made with useful stainless hard metal to avoid the pollution of the material of the rod and possible points of oxide of the mechanized zones.

Cressi Trevira Wihte Line 1.5 mm 50 m: 100% polyester of high tenacity, waterproof and with high resistance to breaks and erosion. Really polyvalent because its relationship resistance-diameter-price.

Cressi Dyneema Brown Rope 2 mm 50 m Spearfishing: Pure high resistance Cressi Dyneema rope (200 kg) perfect for use in reel, spear gun or for DIY. White color.

Pure high resistance Cressi Dyneema rope (195 kg) perfect for use in reel, spear gun or for DIY. White color.

TDS Scuba Diving Mask Strap Transparent silicone 16 mm: Mask strap in white silicone. Valid for many market mask models.20 mm wide.

Special neoprene support to attach to the wrist by Velcro, which allows to mount TDS Maru, S1000, V10 and diving flashlights or similar sizes diving lights, leaving the hand to continue working with it. Very comfortable when focusing and transporting the lighting during the dive.