Description:Light weight, sturdy and compact first stage
The scuba regulator Rover 2S is an excellent choice for intensive rental use in the Diving Centers and for all divers who want reliability.
The new R2S first stage is the evolution of the piston regulator. A sandblasted finish to increase scratch resistance. The protection cover is designed to allow the installation of an RFID chip for rental use managed by dedicated PC software.
Easy and reduced maintenance for INT and DIN version.
Mid-size second stage
Ideal for Diving Centers
Mares Regulators Technologies:
DFC: The DFC system (Mares patented) minimizes the pressure drop that occurs in all regulator first stages when the diver inhales. This phenomenon is even more pronounced as depth increases and when airflow demand from the regulator rises.
The DFC system is an exclusive system, unique on the market, that operates in relation to the diver's actual air demand, independent of depth and tank pressure.
The DFC system uses the Venturi Effect, optimizing the regulator's sensitivity and minimizing inhalation resistance, especially during dives in extreme conditions.
TRI-VALVE MATERIAL: The Tri Material Valve is composed of: a central valve body manufactured in nickel-plated brass;
a highly-resistant polyurethane coating covering nearly the entire valve body that can ensure elevated resistance to wear and mechanical stresses;
finally, an additional covering is applied to the surface ("head") of the valve; this covering is also polyurethane but has a softer "modulus" (hardness) to provide a perfect seal, even under extreme conditions.
Thanks to the use of a special technology ("adhesion at the molecular level") and the characteristics of the materials used, a high level of safety (uncontrollable free flow never occurs) and reliability is guaranteed under any conditions
VAD SYSTEM: The air coming from the LP-hose passes through the second stage control valve and is conveyed directly to the mouthpiece through the by-pass tube (Mares patented). In the mouthpiece connector, the airflow creates a swirling action, or “vortex”.
The core of the vortex is a low-pressure area, which, during inhalation, helps to hold down the second stage diaphragm, thus markedly increasing regulator sensitivity. The decisive advantage of the VAD System lies in the precision of its control. The VAD supplies the inhalation effort with just the intensity required.
Another advantage of the VAD system is related to the bypass tube, through which most of the air is delivered. In cold water diving, this system prevents ice crystals (which can be generated by the expansion of humid air in cold temperatures) from interfering with the proper operation of second stage components.
Producto fuera de stock. Consultar en los próximos: días de entrega
- FIRST STAGE
Thanks to a new technology created in the dental sector, it is now possible to have a custom fit mouthpiece. Simply immerse Jax in boiling water for a few seconds, bite down for a personalized mouthpiece and welcome to more comfortable and relaxing dives. Jax can be fitted on all Mares regulators.
Regulator mouthpiece made of PVC; something more rigid than traditional silicon, but much more durable texture.
Piece of hard plastic deformable with heat, which is standing on the top of the hoses to prevent bending. Blister with 2 units.
Mouthpiece in black or transparent silicone with molded part for the palate. It provides a more anatomical fit for the mouth and avoiding having to bite harder to hold in possition.
subacqua shark regulator mouthpiece: Resistant silicone mouthpiece with color inlaid reinforcement in the area of contact with the teeth. Valid for almost all models of market regulators and octopus. Available in transparent and black silicone.
subacqua comfort regulator mouthpiece: The Subacqua Comfort mouthpiece for regulator, is a customizable mouthpiece that allows perfectly fit the shape of the mouth, jaw and teeth, providing comfort and fit never seen before.
Octopus holder adaptable to all kinds of mouthpieces. Allows carriying the octopus and locate it at all times.Prevent the sand or other contaminants incoming.
Spare mouthpiece for the regulator. Made in silcone. Available in black or clear silicone.
A round bag for carrying a regulator and other equipment that is not excessively bulky. The main pocket, with a zip fastening, has been created to hold and protect the regulator. On the opposite side, a second zipped pocket holds a mesh extension that transforms the bag into a tall kitbag, with shoulder straps for carrying.
A round bag for carrying a regulator and other equipment that is not excessively bulky. The main pocket, with a zip fastening, has been created to hold and protect the regulator.
Pressure gauge up to 400 bar, with steel case and rubber sheath in green for nitrox-oxygen.
subacqua compact dual pressure gauge: subacqua compact dual Pressure Gauge with small size and easy reading. Dual scale for psi and bar readings.
Gauge pressure up to 400 bar, with steel housing and protective rubber boot. Very resistant socket with rubber rings on either side.
Multitool thats combining in one piece four keys and allen nut.
Rubber protective cap for INT valves. Absorbs impacts and prevents dirt inside.
Low pressure hose to inflate your jacket. Standard valve connection to BPI and LP 3/8 thread for connection to the first stage.
Second stage regulator swivel that allows hose at an angle of 120 degrees in a fixed possition.
In one tool: wrenches, screwdrivers, awl and allen keys.
Converting piece that screws on regulators with DIN 200 system, and converts into INT system. Very practical for trips where the taps of the bottles have INT system.
Silicone mouthpiece in smaller standard size, specially designed for kids or divers who are more compfortable with an small mouthpiece in his regulator.
Very easy to assembly in any regulator 2nd stage.
SCUBAPRO's Compact Pressure Gauge is an ideal travelling gauge or back-up instrument.
The TRAVEL REG BAG comes in a new "vintage" style commemorating SCUBAPRO's 50-plus years in diving. It features one large main compartment with straps to secure your reg while in transit. A clear zippered inside pocket allows you to store a logbook or any documents you might need while traveling
Pressure gauge with metal body and up to 400 bar scale, ultra-resistant and durable due to to the protective rubber that covers it. Includes 80 cm length high-pressure hose.
High quality pressure gauge with metal body and side handle, specially designed for diving in sidemount. Finished in metal and mineral glass. Scale up to 400 bar.
Pressure gauge in high quality metal housing and highly resistant mineral glass.Metalic and mineral glass finish.Scale up to 400 bar
High pressure hose for pressure gauge 15 cm length. Special to set the pressure gauge on the regulator of stage or bailout tank or in sidemount configurations.
On / off valve that opens or closes the air flow into the hose line where it is installed. Ideal to place on the second stage regulator due to its small size. Approximate length: 4.5 cm