TDS Tech Wing 24 liters: Double-bladder all-back stabilizing jacket, Outer bag of CORDURA® 1000, Inner air cell of tear-proof polyurethane, radio frequency welded easily replaceable, Lift: 230 N (23,45 kg), Corrugated group with inox elements, Volume: 28 liters. CE certified according to Norms EN250 and EN1809

TDS Frameless SC Scuba Diving Mask: Reduced contour mask designed for technical diving. Low profile frameless design, with a single crystal that gives a wide panoramic and peripheral vision; with the very small profile makes it easy to carry in suit pockets or harnesses.

Our SMS regulator kit is designed to take the guessing out when setting up your sidemount regulator configuration. This new kit includes (2) 212 second stage regulators, (2) high-performance DC1 regulators, proper hose length for the left and right bottles and (2) brass gauges. Also available separately are Angle Adapters for each regulator to help streamline routing and increase comfort.

TDS diving pressure gauge pony type, reduced size, which is placed directly on an HP output of the first stage without hose. Widely used in the stage tanks regulators to control gas in them, reducing the size of the installation and minimizing potential failure points, such as HP hoses.

Replacement battery for the Cressi Newton/Drake computer model.

Dry sealed system suitable for cold water diving. Specially designed for technical diving first stage.No turret, 4 MP port 3/8 UNF, 1 HP port 7/16 UNF

HP high pressure hose for pressure gauge 80 cm length. Connect the first stage regulator with a pressure gauge.

HP high pressure hose for pressure gauge 65 cm length. Connect the first stage regulator with a pressure gauge.

High pressure hose for pressure gauge 18 cm length. Special to set the pressure gauge on side stage or bailout tank regulator.

High pressure hose for pressure gauge 15 cm length. Special to set the pressure gauge on the regulator of stage or bailout tank or in sidemount configurations.

HP high pressure hose for pressure gauge 110 cm length. Connect the first stage regulator with a pressure gauge.

Plastic hook to place at the end of a 5 mm rubber band. It is very useful in accessories like wetnotes, pencils, computers ... etc to keep seuros, but also operational without his ring drop.

Apeks has developed unique first stages specifically for use on a twinset. The benefits of this system are that there is a minimised risk of accidental snagging, no hose kinking and easier access to the manifold valves. Each first stage has three medium pressure ports and one high pressure port. They are over-balanced, cold water compatible and extremely robust. TEK3 looks great too!

The XTX50 is for the discerning diver who wants the benefits of a feature-rich regulator at a moderate price. This popular regulator has four medium-pressure ports all mounted on a rotating turret, resulting in optimal hose routing while eliminating sharp bends in the hose.

As the popularity of sidemount diving continues to grow around the world, Apeks delivers a regulator kit that contains all of the necessary hardware and accessories to complete your breathing set-up, including two award-winning XTX50 regulators.