MALE M26 TO DIN 200 G5/8 FEMALE CONVERTER
- -20%
vandagraph r-22van oxygen sensor for divesoft: Vandagraph R-22VAN oxygen sensor, compatible with Oxyspy. NOTE: This sensor is not suitable for use with Rebreathers
The AP Diving surface marker buoys can be inflated from a secondary air source, at any time during the dive to signal the end of it and mark the starting point .Also can be used as decompression globe.
Without isolation valve manifold for mounting twins. Different measures depending on thecylinders of the set: 171 mm for 10/12 liters long twins, 203 mm for 12/15 liters twins
Tank bottom for aluminum tanks in S80 and S63 format. Protect the bottom of the bottles from bumps and scratches. Color: Black
Fixed elbow to place between the second stage and the hose, which allows routing to 90 degrees. Made of chrome plated brass. Thread 9/16 "Male to 9/16" female.
Valve with M25 thread and toroidal sealing bottles (not EN144), exit DIN / INT convertible by core with a 232 atm working pressure. Black plastic knob on the right and output for connection to modular manifold.
2 litre Steel Diluent Cylinder: WP 232 Bar, M25 x 2, c/w multilingual "Compressed Gas / Breathing Air" cylinder sticker. Rebreather Diluent Cylinder Valve: DIN 5/8" BSP outlet, black hand wheel and black bump cap
Valve with M25 thread and toroidal sealing bottles (not EN144), exit DIN / INT convertible by core with a 232 atm working pressure. Black plastic knob on the left and output for connection to modular manifold.
Knob for diving valve with opening indicator. When the tank is closed a red ring around appears, and when tank is open the ring is green.
Valve knob made of green rubber, with a length greater than the usual knobs for easy opening and closing. They are compatible with most of the axes of the valves. Very used to distinguish decompression and rebreathers oxygen tanks.
Twins valve for 10 or 12 liters in long form cylinders (171 mm diameter). With metric M25x2 EN144 thread . Manifold connection with isolation valve.
Full set of twin cylinders, DIR configured according to standards and includes the following items:12 liters tanks in long format, working pressure 232 bar, thread M 25x2 tap EN144 and concave bottom, Twin cylinders valve with manilfold and isolation valve, Stainless steel rings 171 mm in diameter
5.7 liters (40 cubic feet) tank made of aluminum alloy 6061-T6. CE approval. Flat bottom. Dimensions: Diameter - 133.4 mm; Height - 645 mm. Weight: 7.3 kg
11.1 liters (80 cubic feet) tank made of aluminum alloy 6061-T6. CE approval. Flat bottom. Dimensions: Diameter - 184.2 mm; Height - 658 mm. Weight: 14.2 kg .200 Bar
The VR-T EVO model can be shipped airfreight, allowing the diver to travel around the world with the dpv and without worrying about logistics. The VR-T EVO model is equipped with a NimH battery that can be charged in 4,5 hours and that allows up to 100 minutes runtime at a cruising speed or 60 minutes at a 65 m/min maximum speed. The VR-T EVO model can be shipped airfreight, allowing the diver to travel around the world with the dpv and without worrying about logistics.