STREAM RING 20 WING COLORED

DTD
€304.00 -10% €273.60

Circular style wing for diving with doubles. STREAM RING 20 was designed for diving with double tanks from 2x7-2x12 and stage. Due to the small profile, along with sufficient lift, this wing is especially suitable for recreational and also tec diving.

  • -10%

M8 SCREW S.S. 30 MM

TDS

Not available in this country.

Stainless steel M8 screw and 30mm long. To attach the single tank adapter to the back plate, and for many other uses.

M8 SCREW S.S. 25 MM

TDS

Not available in this country.

Stainless steel M8 screw and 25mm long. To attach the single tank adapter to the back plate.

ARMADILLO BACK PAD

DTD
€41.00 -10% €36.90
Additional rear part of backplate for attaching the sidemount bottles.Material: Cordura 1100, webbing, stainless-steel AISI 316. Weight: 0,28 kg
  • -10%

12 L LONG STEEL CYLINDER

FABER
€320.00 -20% €256.00

Faber 12 liters container in long format and white color. CE approved and compliance with EN250 standard. The thread is M25x2 with standard EN144 rule. Work pressure of 232 bar. Not include valve.

  • -20%

2 L STEEL OXYGEN CYLINDER W/ VALVE

APD
€284.00

2 litre Steel Oxygen Cylinder: WP 232 Bar, M25 x 2, c/w Oxygen Sticker. Rebreather Oxygen Cylinder Valve: oxygen clean, DIN 5/8" BSP outlet, green hand wheel and green bump cap

MALE M26 TO DIN 200 G5/8 FEMALE CONVERTER

APD
€40.00 -20% €32.00
For gas-filling when travelling in Europe and/or adapting an M26x2 cylinder valve to accept a 5/8" BSP first stage, compressor connector or O2 whip
  • -20%

M25 TWIN RIGHT VALVE WO/ CAP 232 B

TDS

Not available in this country.

Valve with M25 thread and toroidal sealing bottles (not EN144), exit DIN / INT convertible by core with a 232 atm working pressure. Black plastic knob on the left and output for connection to modular manifold.

90° LP SWIVEL

BTS
€37.00
90 ° swivel elbow male thread UNF 3/8 "(LP) to female UNF 3/8" (LP). It enables optimal routing hoses.

R22 VAN OXYGEN SENSOR FOR DIVESOFT

VANDAGRAPH
€115.00 -20% €92.00

vandagraph r-22van oxygen sensor for divesoft: Vandagraph R-22VAN oxygen sensor, compatible with Oxyspy. NOTE: This sensor is not suitable for use with Rebreathers

  • -20%

DECO BUOY 30 LB

APD
€80.00

The AP Diving surface marker buoys can be inflated from a secondary air source, at any time during the dive to signal the end of it and mark the starting point .Also can be used as decompression globe.

NON ISOLATION MANIFOLD (Various Sizes)

TDS

Not available in this country.

Without isolation valve manifold for mounting twins. Different measures depending on thecylinders of the set: 171 mm for 10/12 liters long twins, 203 mm for 12/15 liters twins

S80/S63 ALUMINIUM TANK BOTTOM

TDS

Not available in this country.

Tank bottom for aluminum tanks in S80 and S63 format. Protect the bottom of the bottles from bumps and scratches. Color: Black

2nd STAGE 90° REVOLVING CONNECTOR

TDS

Not available in this country.

Fixed elbow to place between the second stage and the hose, which allows routing to 90 degrees. Made of chrome plated brass. Thread 9/16 "Male to 9/16" female.

RIGHT VALVE DIN 200 1 EXIT

BTS
€48.00
Outlet
VIEW OUTLET
Din valve right expandable. Up to 220 bar. To use with twins and sidemount systems.
Outlet
VIEW OUTLET

M26 OXYGEN VALVE 232 B

TDS

Not available in this country.

Valve with M25x2 thread EN144 bottle, M26x2 output with a 232 atm working pressure. Elongated green plastic knob. Especially for stage cylinders. The valves are shipped with seals and lubricants compatible for oxygen.

TWIN RIGHT VALVE M25 232 BAR WITHOUT CAP

TDS

Not available in this country.

Valve with M25 thread and toroidal sealing bottles (not EN144), exit DIN / INT convertible by core with a 232 atm working pressure. Black plastic knob on the right and output for connection to modular manifold.

CCR M26 OXYGEN VALVE 1 EXIT

APD
€99.00
Oxygen Clean Rebreather Cylinder Valve (2008 Euro spec). M26 Outlet. Oxygen clean. Green hand-wheel and bump cap. M25 x 2 ISO cylinder thread

2 L STEEL OXYGEN CYLINDER W/ M26 VALVE

APD
€370.00

2 litre Steel Oxygen Cylinder: WP 232 Bar, M25 x 2, c/w Oxygen Sticker. M26 Rebreather Oxygen Cylinder Valve (2008 on Euro Spec): oxygen clean, M26 outlet, green hand wheel and green bump cap

CCR M25 OXYGEN VALVE 1 EXIT

APD
€99.00
Oxygen Rebreather Cylinder Valve. DIN 5/8" BSP outlet. Oxygen clean. Green hand-wheel and bump cap. M25 x 2 cylinder thread

CCR M25 DILUENT VALVE 1 EXIT

APD
€65.00
Diluent Rebreather Cylinder Valve. DIN 5/8" BSP outlet. Black hand-wheel and bump cap. M25 x 2 ISO cylinder thread

KNOB W/INDICATOR

TDS

Not available in this country.

Knob for diving valve with opening indicator. When the tank is closed a red ring around appears, and when tank is open the ring is green.

Outlet
VIEW OUTLET

GREEN KNOB

TDS

Not available in this country.

Valve knob made of green rubber, with a length greater than the usual knobs for easy opening and closing. They are compatible with most of the axes of the valves. Very used to distinguish decompression and rebreathers oxygen tanks.