Prices drop

LP low pressure regulator hose 210 cm length. Connecting the 1st stage to the second. Ideal for twin cylinders type DIR configurations.

Complete harness for mounting a side tank for stage, bailout or side mount. It is valid for aluminum cylinders used in technical diving of the S40 type. The set comes pre-assembled and requires minimal installation by the user, thus customizing the position of the tank.

Mares Sirius diving computer bungee band adapter kit. Can be easily attached with the same metal pin as the standard webbing. The length of the elastic strap can be quickly adjusted to fit any type of suit.

Cressi Templa Shaft 6.50 mm: Cressi Templa rod for speargun made with finishing parameters and very restricted dimensions to obtain a maximum adaptation to all type of mechanisms. Mechanism made of stainless steel tools “hard metal” to avoid the pollution of the rod material and possible rust spots of the machined zones

Very elastic and thermal booties due to their Nylon outer/Metallite© inner combination. The Metallite© maintains the advantages of the microporous neoprene ("bubble in sight or raw") in terms of thermal capacity but making unnecessary the insertion of the foot pocket with water or soapy water.

HP high pressure hose for pressure gauge 80 cm length. Connect the first stage regulator with a pressure gauge.

These are single-lined, thin, high stretch neoprene boots.The inner is lined in Metallite so they are easy to put on.The sole has an effective non-slip lining.

Cressi Swim & Surf Neoprene Hood 2 mm: Cressi hood in 2mm Neoprene can be used for swimming / snorkeling / diving / scuba diving and for travel / boat use, jet skiing / surfing. The size fits most people.

PIXEL is a 100% silicone short fin that benefits from Cressi-sub's experience as a manufacturer of diving and freediving fins since 1946 in terms of foot pocket anatomy, materials, design, and production.

Cressi Templa Shaft 6.50 mm: Cressi Templa rod for speargun made with finishing parameters and very restricted dimensions to obtain a maximum adaptation to all type of mechanisms. Mechanism made of stainless steel tools “hard metal” to avoid the pollution of the rod material and possible rust spots of the machined zones

The Cruise Reg is a shoulder bag to protect your regulator and other accessories. Equipped internally, it can also be your bag for tablet and documents.

TDS Thermodive Shirt Scuba Diving Undersuit: Thermodive Undersuit Shirt are designed to provide the thermal protection and comfort needed to dive with a dry neoprene suits Trilaminated dry suits serve as a thermal complement to thermal interiors of greater weight The shirt has clasps in the cuffs specially designed so the shirt can be worn without the sleeves bunching up and they do not interfere the cuffs sealing

Covert Mask in black silicone, ideal for spearfishing and apnea due to its reduced internal volume.

Line cutter made of the best Beta Titanium alloy, with an abrasion resistance 5-6 times higher than other titanium alloys. Side aperture for cutting thick ropes or cords more easily.

subacqua mistral myopia lens symetric: Customizable corrective lens to be used with the Subacqua Mistral mask.

Tank rubber boot for 2x10 liters twins. Keeps the bottle in standing upright, while avoiding scratches and knocks.

TDS Stainless Steel Micra Knife: The TDS Micra is a knife that stands out for its small size and its lightness, which allows it to be placed anywhere in the BCD being always available for use, but with no interferences

The  TDS spools are manufactured with aeronautical anodized black aluminum alloy. Specifically designed for technical diving, incorporate special features such as the serrated edge for an optimal grip even with gloves and oversized holes for easy operation.