Rotating snap hook with double support hose. Holds up to two hoses. 2 units.

Piece of hard plastic deformable with heat, which is standing on the top of the hoses to prevent bending. Blister with 2 units.

TDS Lithium battery for Helios 6000 underwater video light: Ion-Lithium battery compatible with TDS Helios 6000 underwater video light. Voltage: 14,4 V Capacity: 3400 mAH

Kit to converts the TDS regulator Gull model, from international system to DIN system. Includes piece with the steering wheel and high pressure O-ring. The change can be done by the user, or may be performed by Casco Antiguo qualified personnel .

Kit to converts the TDS regulator Oceanus/Caribe model, from international system to DIN system. Includes piece with the steering wheel and high pressure O-ring. The change can be done by the user, or may be performed by Casco Antiguo qualified personnel .

Kit to converts the TDS regulator Tac Black model, from international system to DIN system. Includes piece with the steering wheel and high pressure O-ring. The change can be done by the user, or may be performed by Casco Antiguo qualified personnel .

Complete inflation system valid for all TDS BCDs and compatible with other brands. Includes: Flat Upper valve with locking, Trachea Tube 40 cm long, Low pressure inflator BPI, Silicone ring

O-rings box Viton 85 material shore A hardness, compatible with oxygen; with 14 different sizes and 10 units of each measure.

Mesh-net bag with shoulder strap and top closure with drawstring and loop, to transport and store fins and basic diving equipment items such as mask, snorkel, booties, reel-spool, buoys...etc and keep everything organized on the boat or in the dive case.

Complete rigging set for cylinders S40 . Two stainless steel trigger type carabiners. Black nylon rope. Rigid hose type tube to facilitate the passage of the fingers.  Stainless steel clamp covered with nylon webbing to avoid abrasions. Two wide elastic bands to fold the hose and hold the second stage of the regulator.

sitech latex neck seal for quick neck: Latex Neck Seal with bellow shape. Sligthly tapered. Guide ribs for easy trimming. Designed to be used with the Neck Tite system. Available in three sizes: Small, Medium and Large

High resistance cordura weight pocket for harness, with capacity for 2.3 kg ballast pads approximately. Fast closing and release clip in plastic on the outside and flap with Velcro. Ideal to place on harness webbing, tank webbing and even on belts. Stainless steel eyelet at the bottom for water drainage and rear strap to adjust to bottle buckle or harness. Sold by the unit.

Ballast system for back plate, consisting of two pockets that are attached to a webbing and end in a riveted ring, which is attached to the holes of the back plate. The left pocket includes a D-ring for attaching a pressure gauge or monitoring device.

The TDS Tolok pocket, is a specially pocket designed for technical diving, being valid for both backmount and sidemount systems thanks to the versatility of its design. A pocket designed down to the smallest detail to offer maximum performance to the technical diver.