Mesh-net bag with shoulder strap and top closure with drawstring and loop, to transport and store fins and basic diving equipment items such as mask, snorkel, booties, reel-spool, buoys...etc and keep everything organized on the boat or in the dive case.

Complete rigging set for cylinders S40 . Two stainless steel trigger type carabiners. Black nylon rope. Rigid hose type tube to facilitate the passage of the fingers.  Stainless steel clamp covered with nylon webbing to avoid abrasions. Two wide elastic bands to fold the hose and hold the second stage of the regulator.

sitech latex neck seal for quick neck: Latex Neck Seal with bellow shape. Sligthly tapered. Guide ribs for easy trimming. Designed to be used with the Neck Tite system. Available in three sizes: Small, Medium and Large

High resistance cordura weight pocket for harness, with capacity for 2.3 kg ballast pads approximately. Fast closing and release clip in plastic on the outside and flap with Velcro. Ideal to place on harness webbing, tank webbing and even on belts. Stainless steel eyelet at the bottom for water drainage and rear strap to adjust to bottle buckle or harness. Sold by the unit.

Ballast system for back plate, consisting of two pockets that are attached to a webbing and end in a riveted ring, which is attached to the holes of the back plate. The left pocket includes a D-ring for attaching a pressure gauge or monitoring device.

The TDS Tolok pocket, is a specially pocket designed for technical diving, being valid for both backmount and sidemount systems thanks to the versatility of its design. A pocket designed down to the smallest detail to offer maximum performance to the technical diver.

Heavy duty cordura accessory holder pocket for harness or jacket, perfect for carrying small accessories and even a spare mask . Ideal to place on harness webbing, jacket and even on belts with webbing up to 50 mm.

TDS slate book with 40 waterproof pages and cordura cover with small pockets. Includes graphite pen attached with bungee to one edge of the cover. Allows writing in and out of the water.

TDS Tek Advanced diving surface marker buoy  SMB 150 cm legth in red color. The inflation is realized by plastic valve with a bc hose, wing hose or dry suit hose. Also allows the buccal inflation.
Thanks to its closed system, the air remains in the interior preserving the shape of the buoy, keeping it erect and comletely inflated on surface. It´s also possible to use as a bouyancy emergency element on the surface.

The Apeks HP twin adaptor allows you to use both an SPG and a transmitter from a single High-Pressure port. This is especially useful for 1st stages that only have a single HP port. The HP twin adaptor utilises a standard 7/16” thread and is suitable for use on all manufacturers 1st stages.

TDS Goodman type handle made of lightweight anodized aluminum. The height of the handle is adjustable by means of a side screw with a wide knob, allowing it to be adjusted to the size of our hand and/or to the use with or without gloves. It is possible to adjust the height in immersion because it is not necessary to use a wrench.

Screen protector for Suunto D-Series dive computers. The anti-scratch sticker protects the screen of the Suunto D-Series dive computer without limiting visibility. Each package includes two anti-scratch protectors and instructions.

Advanced screen protection for Suunto EON Core . The anti-scratch protector fits precisely to the screen and offers advanced protection for the Suunto EON Core dive computer without restricting vision. Each package includes a screen protector and instructions. 

Methacrylate screen protector for Suunto HelO2, Vyper2 and Vyper Air computers. The screen protector provides scratch protection for Suunto HelO2, Vyper2 and Vyper Air without limiting visibility.

Replacement battery kit for Suunto D-series dive computers models D4/D6/D9/DX and its variants.

Replacement battery kit for Suunto D-series dive computers models Mosquito / D3.

Replacement battery kit for Suunto D-series dive computers models Stinger/spyder

Extremely rugged and flexible high pressure hose for Suunto (SM-36) pressure gauges. Swivel mount not included. Usable in pressures up to 300 bar / 4000 psi; Length 15 cm / 6 inches

Black strap for Suunto HelO2, Vyper, Gekko and Zoop. The black strap kit for Suunto HelO2, Vyper, Gekko and Zoop is long enough for you to wear your dive computer over a wetsuit or drysuit. The kit includes an easy-to-clean, long-lasting strap and pins for attaching the strap.

The strap fits Suunto Zoop Novo and Vyper Novo models. This strap is compatible with Suunto Zoop Novo and Vyper Novo. The kit includes the strap and the pin to attach it.

Adapter kit for using the Suunto EON Core with rubber band lanyard . Complete kit for attaching a rubber band to the Suunto EON Core dive computer. Includes approximately 1 m/39 inches of bungee cord, adapters, pins and mounting instructions. Once attached, the length of the cord is easily adjustable. A flat-blade screwdriver is required.