DIVING REGULATOR ACCESSORIES

Thanks to a new technology created in the dental sector, it is now possible to have a custom fit mouthpiece. Simply immerse Jax in boiling water for a few seconds, bite down for a personalized mouthpiece and welcome to more comfortable and relaxing dives. Jax can be fitted on all Mares regulators.

Low pressure hose for regulator with braid outer coating. Length 75 cm. Colors: Blue, red and pink.

Adapter part which converts a low-pressure outlet of the first stage, in three low pressure outlets routed as T.

Tool to adjust the height of the cam of the second stage, and leave it in the optimum position without leaks and with the least effort of inspiration. Essential in any workshop regulators

Low pressure hose for octopus with braid outer coating. Yellow color. Length 100 cm.

Low pressure hose for main regulator. Color black. Length 75 m.

Low pressure hose for octopus with braid outer coating. Yellow color. Length 100 cm.

Silicone spray for maintaining any equipment that needs to be lubricated, such as O-rings, membranes and rubber components in general.

Tube of oxygen compatible grease for scuba diving, for lubricating Viton O-rings or surfaces that are to be exposed to contact with this gas. Necessary in all scuba diving regulators that are in oxygen service, and essential in the maintenance of any model of Rebreather.

Second stage regulator swivel that allows hose at an angle of 120 degrees in a fixed possition.

Second stage regulator swivel that allows hose rotation up to 120 degrees orientable.

Plastic screw cap, which is placed in the thread on regulators with DIN system to protect against the ingress of water and foreign bodies.

Converting piece that screws on regulators with DIN 200 system, and converts into INT system. Very practical for trips where the taps of the bottles have INT system.

Coverting piece to adapt Scubapro first stages to DIN 300 system. Includes O-Rings and air filter. It is also valid for other non Scubapro regulators (consult with a qualified technical service)

Fixed elbow to place between the second stage and the hose, which allows routing to 90 degrees. Made of chrome plated brass. Thread 9/16 "Male to 9/16" female.

LP low pressure regulator hose 100 cm length. Connecting the first stage to the second stage regulator.

LP low pressure regulator hose 150 cm length. Connecting the first stage to the second stage regulator.