D RING + STOPPER 45 DEGREES

TDS

Not available in this country.

Integral piece D-ring stopper at 45 degrees, in stainless steel.

Outlet
VIEW OUTLET

D RING + STOPPER 90 DEGREES S.S.

TDS

Not available in this country.

Outlet
VIEW OUTLET

D RING 50 MM S.S.

TDS

Not available in this country.

D ring 50 mm long stainless steel. Essential for the assembly of harnesses in technical diving.

Outlet
VIEW OUTLET

STAINLESS STEEL M8 WASHER

TDS

Not available in this country.

tds stainless steel m8 washer: Flat tds washer made of stainless steel for M8 fasteners used in backplates, rings and single tank adapters.

ARMADILLO BACK PAD

DTD
€41.00 -10% €36.90
Additional rear part of backplate for attaching the sidemount bottles.Material: Cordura 1100, webbing, stainless-steel AISI 316. Weight: 0,28 kg
  • -10%

BACK PLATE POCKET

DTD
€32.00 -10% €28.80

Designed for placing a buoy or a lifting bag between the backplate and diver´s back. Stainless-steel screws for attaching the pocket to the backplate are included.

  • -10%

BIG POCKET FOR HARNESS

DTD
€31.00 -15% €26.35
Pocket for those who do not want to glue pocket on the suit. Dimensions 29x19x6 cm.
  • -15%

CORDURE ZIPPED BIG POCKET

TDS

Not available in this country.

The TDS Xtrem TK3 is a pocket specially designed for technical diving, being valid for both backmount and sidemount systems, due to the versatility of his design. The pocket is designed with the smallest detail to offer maximum benefits to the technical diver.

Outlet
VIEW OUTLET

WEIGHT POCKET FOR BACKPLATE (Pair)

DTD
€89.00 -10% €80.10
Ballast system consists of 2 pockets, which are slipped on a waist strap and fastened to a backplate (pair of bolts and nuts included). Left pocket has a D-ring for mounting a pressure gauge. Inside each pocket is an inner pocket with a handle for inserting the weights.
  • -10%

TRIM POCKETS FOR BACKPLATE

DTD
€23.00 -10% €20.70
Small pockets for attachment to the backplate. Each pocket can carry one piece of weight block (dimensions 8x10x3 cm, 1,5-2 kg). Price is for 1 pair (2 pieces).
  • -10%

M8 WINGNUT S.S.

TDS

Not available in this country.

Stainless steel M8 wingnut to adjust the screws to the back plate and mount the twin cylinders or single tank adapter.

XTREM TK3 POCKET

TDS

Not available in this country.

The TDS Xtrem TK3 is a pocket specially designed for technical diving, being valid for both backmount and sidemount systems, due to the versatility of his design. The pocket is designed with the smallest detail to offer maximum benefits to the technical diver.

Outlet
VIEW OUTLET

CROTCH STRAP W/ D RING

DTD
€15.00 -20% €12.00
Polypropylene strap with stitched on D-ring + 1 D-ring and 1 stopper.
  • -20%

INFLATOR KNEE JOINT

TDS

Not available in this country.

tds inflator knee joint joint: tds Replacement inflator knee joint (elbow) to connect the inflation trachea hose with the wing bladder.Made of high strength plastic, it has reinforcing ribs to better resist knocks and traction.

ELASTIC CORD - BUNGEE 6 MM (1 M)

TDS

Not available in this country.

tds elastic cord bungee 6 mm by meters:Elastic cord - bungee type 6 mm thick for many uses both in technical diving, as recreational: 2nd stage hang neck, fastening computers, tanks, sidemount ... etc. Color Black. Sold by meters

DUMP VALVE CLOSURE CAP

TDS

Not available in this country.

tds dump valve closure cap: Closure cap for closing / annuling quick dump valves on wings or BCs.Compatible with most wing and BC valves on the market.

INFLATOR END PIECE X01K

DTD
€35.00

Lp inflator for wings or jacket with plastic buttons. Material: reinforced techno polymer characterized by glass charges, polyamid and stainles steel. Weight: 0,11 kg

SHOULDER-PADS (Pair)

DTD
€15.00 -10% €13.50

Comfortable shoulder pads. Material:Cordura 1100, polyethylene foam. Weight: 0,05 kg

  • -10%

STEEL BOLT SNAP 70 MM 1/2"

TDS

Not available in this country.

Stainless steel bolt snap type with swivel eye, 70 mm 1/2"

Outlet
VIEW OUTLET

BOLT SNAP 64 MM 3/8 "

TDS

Not available in this country.

Stainless steel bolt snap with swivel eye, 64 mm (3/8 ")
Outlet
VIEW OUTLET

BELT HARNESS BUCKLE

TDS

Not available in this country.

LP INFLATOR HOSE 51 CM

DTD
€23.00 -10% €20.70

LP hose with racord to connect on the low pressure inflator BPI of a wing or jacket. Length 51 cm.

  • -10%

LP INFLATOR HOSE 100 CM

TDS

Not available in this country.

LP Low pressure hose with racord to attach to on low pressure inflator BPI, 100 cm length.

LP INFLATOR HOSE 20 CM (Sidemount)

TDS

Not available in this country.

LP Low pressure hose 20 cm length with pipe clip to attach to a low pressure inflator . Especially for sidemount.