ACCESORIOS ALAS - ARNESES

The TDS Xtrem TK3 is a pocket specially designed for technical diving, being valid for both backmount and sidemount systems, due to the versatility of his design. The pocket is designed with the smallest detail to offer maximum benefits to the technical diver.

tds inflator knee joint joint: tds Replacement inflator knee joint (elbow) to connect the inflation trachea hose with the wing bladder.Made of high strength plastic, it has reinforcing ribs to better resist knocks and traction.

tds elastic cord bungee 6 mm by meters:Elastic cord - bungee type 6 mm thick for many uses both in technical diving, as recreational: 2nd stage hang neck, fastening computers, tanks, sidemount ... etc. Color Black. Sold by meters

tds dump valve closure cap: Closure cap for closing / annuling quick dump valves on wings or BCs.Compatible with most wing and BC valves on the market.

LP Low pressure hose with racord to attach to on low pressure inflator BPI, 100 cm length.

LP Low pressure hose 20 cm length with pipe clip to attach to a low pressure inflator . Especially for sidemount.

TDS Stainless steel M8 screw and 40mm long. To attach the single tank adapter to the diving back plate, and for many other uses.

tds flat overpressure dump valve: tds Pressure relief - dump valve for wings and BCDs. The main feature is his very low profile, making the valve almost not protrude from the profile of the wing or jacket, favoring hydrodynamics and protecting it from blows.

High resistance cordura weight pocket for harness, with capacity for 2.3 kg ballast pads approximately. Fast closing and release clip in plastic on the outside and flap with Velcro. Ideal to place on harness webbing, tank webbing and even on belts. Stainless steel eyelet at the bottom for water drainage and rear strap to adjust to bottle buckle or harness. Sold by the unit.

Ballast system for back plate, consisting of two pockets that are attached to a webbing and end in a riveted ring, which is attached to the holes of the back plate. The left pocket includes a D-ring for attaching a pressure gauge or monitoring device.

The TDS Tolok pocket, is a specially pocket designed for technical diving, being valid for both backmount and sidemount systems thanks to the versatility of its design. A pocket designed down to the smallest detail to offer maximum performance to the technical diver.

Heavy duty cordura accessory holder pocket for harness or jacket, perfect for carrying small accessories and even a spare mask . Ideal to place on harness webbing, jacket and even on belts with webbing up to 50 mm.

Stainless steel bolt snap type with oval swivel eye, 70 mm 1/2"

Stainless steel bolt snap type with oval swivel eye, 90 mm 

Stainless steel bolt snap type with oval swivel eye, 120 mm 1 1/4"

Double bolt snap trigger carabiner type in stainless steel, available in various sizes. It's perfect for working with buoys, spools and lines already laid. Available sizes: 115 mm,