Valve with M25 thread and toroidal sealing bottles (not EN144), exit DIN / INT convertible by core with a 232 atm working pressure. Black plastic knob on the left and output for connection to modular manifold. Matte black finish, designed for special forces that avoids glare and camouflages the diver's silhouette.

Modular side Right-type valves cap, to close the side exit to exit manifold or modular plug. Matt black finish of the military series.

Modular side Left-type valves cap, to close the side exit to exit manifold or modular plug. Matt black finish of the military series.

171 mm to use with doubles 10 - 12 long litres. 204 mm to use with doubles 12 - 15 litres

Manifold with isolation valve for twins mounting. 171 mm for 10/12 long twins. Matt black finish of the military series.

Without isolation valve manifold for mounting twins. Different measures depending on thecylinders of the set: 171 mm for 10/12 liters long twins, 203 mm for 12/15 liters twins

171 mm to use with doubles 10 - 12 long litres. 204 mm to use with doubles 12 - 15 litres.

Twins valve for 10 or 12 liters in long form cylinders (171 mm diameter). With metric M25x2 EN144 thread . Manifold connection with isolation valve.

Twins valve for 10 or 12 liters in long form cylinders (171 mm diameter). With metric M25x2 EN144 thread . Manifold connection with isolation valve. Matt black finish, designed for special forces that avoids glare and camouflages the diver's silhouette.

Twins valve for S80 aluminium cylinders (180 mm diameter). With metric thread M 25x2 EN144. Manifold connection without isolating valve

Steel stainless ring for fitting helmets twin cylinders long with 10 or 12 liter. 171 mm diameter. Strip width 57 mm

Steel stainless ring for fitting helmets twin cylinders long with 12 or 15 liter. 203 mm diameter. Strip width 57 mm

Steel stainless ring for fitting aluminium S080 twin cylinders long with 11.1 liter. 186 mm diameter. Strip width 57 mm

Steel stainless ring for fitting helmets twin cylinders long with 18 liter. 216 mm diameter. Strip width 57 mm.

Complete harness for mounting a side tank for stage, bailout or side mount. It is valid for aluminum cylinders used in technical diving of the S80 type. The set comes pre-assembled and requires minimal installation by the user, thus customizing the position of the tank.

Complete harness for mounting a side tank for stage, bailout or side mount. It is valid for aluminum cylinders used in technical diving of the S40 type. The set comes pre-assembled and requires minimal installation by the user, thus customizing the position of the tank.

Neoprene taps with the diameter of the S80 cylinder, allows routing hoses and collect stage tanks easily during the dive. Also can be a protector for the hull of the tank against occasional bumps.

Neoprene taps with the diameter of the S40 cylinder, allows routing hoses and collect stage tanks easily during the dive. Also can be a protector for the hull of the tank against occasional bumps.

Tank strap that includes a heavy stainless steel buckle. It can be used with single tank adapters or in a conventional BCD.

Valve knob made of green rubber, with a length greater than the usual knobs for easy opening and closing. They are compatible with most of the axes of the valves. Very used to distinguish decompression and rebreathers oxygen tanks.

Stainless Steel piece to join two cylinders and asembly a twin with straps (straps not included). Sold unit.

TDS Nitrox Scuba Diving Tank Decal: Tds nitrox identification sticker to put on bottles Nitrox tanks and make a perfect identification and distinction from other bottles. Dimensions 60 cm x 15 cm