FLASH YS-01
FT06SS03112

FLASH YS-01

304,96 €
0%

FT06SS03112

FLASH YS-01

Consulta especialista
304,96 €
Quantidade
Plazo de entrega estimado do fornecedor 7 días úteis.



Description:

From compact digital cameras to digital SLR cameras. A small DS-TTL and manual strobe with built-in target light

Multiple features condensedinto a compact design.

Circular beam angle of 100°x100° and guide number of up to 20. The YS-01 is a new compact-type slave strobe that can be used for all applications from wide-angle to macro photography.

You can switch between DS-TTL (Digital Slave TTL) and a ten-level manual control function, to enable fine adjustment of the light level according to the photographer's intentions. You can also set up a lighting system that uses two strobes in DS-TTL mode.

Power comes from four AA batteries for a powerful and long-lasting strobe. You can enjoy taking pictures all day long without having to recharge the batteries

The recycle time takes about two seconds with nickel-metal hydride batteries (2700 mAh) for stress-free continuous shooting.
The YS-01 is furnished with a high-luminance white LED target light (1W) indicating the optical axis of the strobe attached to its front face that is effective for night diving.

You can fully exercise your creativity with the YS-01, which can be used as a primary strobe or secondary strobe in a wide range of applications, from compact digital cameras to digital SLR cameras.

Characteristics:

* Guide Number (ISO 100/m) (land): 20

* Beam Angle 100°x 100° (with diffuser 110°x110°)

* Batteries 4xAA A: 6V Ni-MH: 4.8V

* Number of Flashes*1 A: 230 Ni-MH: 330

* Recycle time (full)*2 A: 2.5 sec. Ni-MH: 1.9 sec.

* Color temperature: 5600K

* Color temperature w/diffuser: 5250K

* Depth rating: 75m / 250ft

* Dimensions (WxHxD): 68x108x129mm / 2.7x4.3x5.2inch

* Weight : 505g / 17.7oz (w/o batteries) * Attached a fixing bolt to the Strobe.

* Underwater weight : -10g / -0.4oz(w/ batteries)

* Others:

- Exposure control: DS-TTL, Light level control dial (GN): 1 / 1.4 / 2 / 2.8 / 4 / 5.6 / 8 / 11 / 16 / 20 (10 steps)
- Pre-flash control: Equipped with pre-flash cancel mode
- DS-TTL function
- Slave function
- Auto power OFF function
- Sync cord: Fiber-Optic Cable (L-type)
- Over-pressure relief valve
- LED target light

Component Diagram:

   
01 Reflector 03 LED target light
02 Fiber-optic cable socket (slave sensor) 04 Fiber-optic cable socket  (for additional strobe)
   
   
01 Battery cap 04 Light level control dial
02 Target light switch 05 Ready (red)/TTL (green) confirmation lamp
03 Mode switch
Producto fuera de stock. Consultar en los próximos: 7.0000000000 días de entrega