CAIXA ESTANQUE PARA LEIKA D-LUX 9 Y LX100
FTIKE6171

CAIXA ESTANQUE PARA LEIKA D-LUX 9 Y LX100

764,46 €
0%

FTIKE6171

CAIXA ESTANQUE PARA LEIKA D-LUX 9 Y LX100

Consulta especialista
764,46 €
Quantidade
Plazo de entrega estimado do fornecedor 15 días úteis.

Description:

A full featured and durable underwater housing for Panasonic Lumix LX100 and Leica D-LUX Type 109 digital cameras. Suitable for scuba, snorkel, surf, pool, and any application in or around the water.

This compact and lightweight housing provide all important functions of the Panasonic Lumix LX100 or Leica D-Lux (Typ 109) up to depths of 200 feet (60m). Large, easy-to-reach controls are provided for all camera functions including the rear dial and custom function controls. Control functions are placed in a similar configuration to the camera's layout for the most natural operation taking advantage of the muscle memory you've already developed in surface use. Rear controls are marked with easy-to-see laser engraved symbols which never fade or fall off. The front-loading camera mounting system makes installation and removal a breeze. The camera mounting plate allows ready access to the battery and memory card, and features a standard 1/4-20 mounting point for attachment to a tripod topside.

Wide angle and macro close-up<:

The optional WD-4 Wide Angle Dome provides a wider angle of view underwater without the edge distortion, vignetting, or weight typically associated with an external wide angle lens. The WD-4 is a 0.75x magnification factor and simply slides on and off of the housing's lens port.

A press-fit Macro Adapter (sold separately) is available for the attachment of 67mm threaded accessory macro lenses. We recommend a macro lens which is designed for underwater use like those from Epoque, INON, Subsee, Nauticam, and other manufacturers. The adapter should not be used with 67mm threaded wide angle lenses. The wide angle lens would be too far away from the camera's lens to provide an improved image.

Color correction and external lighting:

An integrated TTL circuit is fine-tuned to the camera's flash exposure protocol for the most accurate exposure possible. The circuit is powered by the strobe for zero maintenance and no batteries to change. Exposure compensation in TTL mode is supported using the camera's built-in control. At this time, only Ikelite DS strobes are capable of powering the circuitry. SEA&SEA, INON, and Nikonos strobes attached via electrical sync cord will still enjoy fast recycle times and improved battery life, but must be used in manual exposure modes only.

This housing provides a direct electrical connection to the camera's external flash hot shoe. Cord attachment is as easy as screwing in a lightbulb. The threaded fit prevents accidental detachment during use. The bulkhead connection has been moved to the top of the housing to keep cords out of your way and reduce strain on the cord ends. A variety of sync cord terminations are available for Ikelite, SEA&SEA, INON, or Nikonos strobes for ultimate versatility.

The LX100 does not feature a built-in flash. An external strobe must be connected via electrical sync cord.

A bright constant-on video light can be used instead of or in addition to a flash. Constant-on lights provide added versatility because they can be used for focus assist and for improved colors when shooting video. A constant-on light is not as bright as a strobe flash.

Two 1/4-20 threaded mounting points are included on the bottom of the housing for the attachment of a tray and handle system. Handles provide improved ergonomics underwater and are the foundation for your lighting mounts.

There is a simple rule that brighter is better underwater. A high-quality lighting system can produce magazine quality results with almost any compact camera system.

Vacuum system:

An optional vacuum system allows you to pressurize the housing to check for major leaks prior to entering the water. A 1/2-20 threaded accessory port is included on the side of the housing for the easy installation of an optional Vacuum Kit # 47012. Combined with a full view of the camera and o-ring seal through the back of the housing, there is no greater assurance that your gear will be safe. Our signature open-groove design suspends the rear o-ring in a natural position that is easier to maintain and more reliable than forcing the o-ring into a channel.

Durability and corrosion free performance:

Our brand new ABS-PC blend provides strength and corrosion free performance year after year with minimal maintenance. The specially formulated color deflects the sun to keep your camera running cooler, longer. Compared to black or clear housings, the light gray color provides superior contrast for enhanced view of the camera, LCD screen, and o-ring seal.

Ikelite products are designed, built and tested in the USA. We use locally sourced, top-grade materials. Our housings are built by hand and individually tested for fit and function. Every unit is water pressure tested to 200 feet (60m). We back our products with over 50 years of experience and the best reputation for service within the dive industry.

Specifications:

  • 200 ft (60m) depth rating
  • Controls for all camera functions except Flash switch and Viewfinder switch
  • Slightly negative buoyancy in fresh water
  • 1/4-20 thread tray mounting with 3" (76mm) spacing
  • 3.6 lb (1.6 kg)
  • 6.7 x 7.3 x 5.9 in (152 x 185 x 150 mm)
  • 3.9" diameter glass lens port
  • Producto fuera de stock. Consultar en los próximos: 15.0000000000 días de entrega

    Ficha informativa

    CAIXA ESTANQUE
    FOTOGRAFIA
    TIPO
    COMPACTA
    MARCA CÂMARA
    CANON
    MARCA CÂMARA
    OUTROS