LP REGULATOR HOSE FLEX BLACK 210 CM
Low pressure hose for regulator with braid outer coating. Color black. Length 210 cm.
Low pressure hose for regulator with braid outer coating. Color black. Length 210 cm.
Low pressure hose for regulator with braided outer coating. Color black. Length 100 cm.
LP low pressure regulator hose 150 cm length. Connecting the first stage to the second stage regulator.
Dry sealed system suitable for cold water diving. Specially designed for technical diving first stage.No turret, 4 MP port 3/8 UNF, 1 HP port 7/16 UNF
LP low pressure regulator hose 100 cm length. Connecting the first stage to the second stage regulator.
LP hose with racord to connect on the low pressure inflator BPI of a wing or jacket. Length 51 cm.
HP high pressure hose for pressure gauge 80 cm length. Connect the first stage regulator with a pressure gauge.
HP high pressure hose for pressure gauge 65 cm length. Connect the first stage regulator with a pressure gauge.
High pressure hose for pressure gauge 18 cm length. Special to set the pressure gauge on side stage or bailout tank regulator.
High pressure hose for pressure gauge 15 cm length. Special to set the pressure gauge on the regulator of stage or bailout tank or in sidemount configurations.
HP high pressure hose for pressure gauge 110 cm length. Connect the first stage regulator with a pressure gauge.
Plastic hook to place at the end of a 5 mm rubber band. It is very useful in accessories like wetnotes, pencils, computers ... etc to keep seuros, but also operational without his ring drop.
Apeks has developed unique first stages specifically for use on a twinset. The benefits of this system are that there is a minimised risk of accidental snagging, no hose kinking and easier access to the manifold valves. Each first stage has three medium pressure ports and one high pressure port. They are over-balanced, cold water compatible and extremely robust. TEK3 looks great too!
The XTX50 is for the discerning diver who wants the benefits of a feature-rich regulator at a moderate price. This popular regulator has four medium-pressure ports all mounted on a rotating turret, resulting in optimal hose routing while eliminating sharp bends in the hose.
As the popularity of sidemount diving continues to grow around the world, Apeks delivers a regulator kit that contains all of the necessary hardware and accessories to complete your breathing set-up, including two award-winning XTX50 regulators.
Robust tds scissors in stainless steel, to act as a cutting element quickly and safely. With his microdentate sheet, it acts on most materials effectively. Indispensable in the technical diving, cave divind and for aquatic rescue teams
Small arrow for cavedivers, useful for marking line, etc. Length is 65 mm, width 40 mm.
The WTX and WTX-D Series is a selection of harnesses, buoyancy cells and accessories which offer unparalleled versatility due to the modular nature of the whole system. Each component can be configured into a highly technical rig for those trained to push the limits, or scaled down to make a travel friendly set up suitable for any diver
Tank strap that includes a heavy stainless steel buckle. It can be used with single tank adapters or in a conventional BCD.
2 litre Steel Diluent Cylinder: WP 232 Bar, M25 x 2, c/w multilingual "Compressed Gas / Breathing Air" cylinder sticker. Rebreather Diluent Cylinder Valve: DIN 5/8" BSP outlet, black hand wheel and black bump cap
3 litre Steel Cylinder: WP 232 Bar, M25 x 2, c/w Diluent Sticker. Rebreather Diluent Cylinder Valve: DIN 5/8" BSP outlet, black hand wheel and black bump cap, M25 x 2 ISO
2 litre Steel Oxygen Cylinder: WP 232 Bar, M25 x 2, c/w Oxygen Sticker. M26 Rebreather Oxygen Cylinder Valve (2008 on Euro Spec): oxygen clean, M26 outlet, green hand wheel and green bump cap
2 litre Steel Oxygen Cylinder: WP 232 Bar, M25 x 2, c/w Oxygen Sticker. Rebreather Oxygen Cylinder Valve: oxygen clean, DIN 5/8" BSP outlet, green hand wheel and green bump cap
3 litre Steel Oxygen Cylinder: WP 232 Bar, M25 x 2, c/w Oxygen Sticker. Oxygen Clean Rebreather Cylinder Valve: DIN 5/8" BSP outlet, green hand wheel and green bump cap, M25 x 2 ISO